Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Joby Smart Stabilizer
Summary of Contents for Joby Smart Stabilizer
- Page 1 3-Axis Handheld Stabilizer for Smartphone User Manual V 1.0...
-
Page 2: Product Overview
Product overview 1. Structure Smartphone shown in illustrations is for reference only Micro USB port (smartphone charging port) Tilt axis Cross arm Roll axis Smartphone holder Telescopic handle Vertical arm retractable and Pan axis extendable (0-7.2in / 0-183mm） Function button Trigger button Status indicator Micro USB port... -
Page 3: Product Setup
Product setup 1. Stabilizer charging Fully charge the battery before powering on the stabilizer for the first time. Charge the stabilizer with the Micro USB cable. The indicator is red in charging status. It will turn green when the battery is fully charged. Micro USB cable 5V/2A USB charger (not included) - Page 4 3. Balancing smartphone When the stabilizer is off, if the smartphone is unbalanced after being mounted, adjust the cross arm until the phone stays horizontal. Leftward Cross arm Best balance Rightward （1） If smartphone tilts to the left, pull cross arm out to the right until phone is horizontal. （2）...
-
Page 5: Power On/Off
When mounting the phone vertically, consider the phone weight for positioning the holder: Heavier phone: the holder is positioned in the middle. Lighter phone: the holder is positioned towards the bottom. Heavier load Lighter load weight: weight： 130-200g ≤130g 0.29-0.44 lbs <... -
Page 6: Controls And Operations
Controls and operations 1. Status indicator The current mode of the stabilizer can be identified by the indicator status as follows: Indicator status Mode / Status Blue light flashes once Pan mode Blue light flashes twice Follow mode Lock mode / stabilizer initialization Constant blue light / motion control mode Initialization failure/... - Page 7 4. Other controls and functions Function button Function Explanation Pan Mode Single tap to switch between pan mode and lock mode Single click / Lock Mode When in follow mode you can use the joystick left/right to control the roll axis angle (-30° ~ +30°) or up/down to control the tilt axis Double click Follow mode angle.
-
Page 8: Operation Modes
For best results, attach the stabilizer to the included tripod to keep it completely still. 1. Set motion speed in the App To set the motion speed, connect to the App and select desired speed from the motion control option in the settings menu. Smart stabilizer rotation speed seconds seconds seconds... - Page 9 2. Enter motion control mode by 3. Set rotation start position clicking the function button 4 times Tilt axis Pan axis Record the first position (rotation start position) by manually moving smartphone to desired position. Hold in position for half a second. Click the function button to record rotation start position.
-
Page 10: App Download
Version Android Version For iOS users: scan the QR code or go to the App Store and search for "Smart Stabilizer". For Android users: scan the QR code or go to Google Play and search for "Smart Stabilizer". Google play App Store 2. -
Page 11: Technical Specifications
Technical specifications 4.65 in 4.35 in 118mm 110.5mm 3.01 in 76.4mm 12.72 in 12.72 in 323mm 323mm 7.67 in 194.7mm 320° 210g / 0.46 lbs Max. tilt range Maximum load weight 320° Max. roll range 320° Max. pan range operation time in motion shooting: around 5 hours; operation Operation time time in normal shooting: around 10 hours smartphones (mobile phone width range: 2.2-3.3in / 57-84mm) -
Page 12: Important Notes
IMPO RT A N T N O T ES The smartphone must be balanced to guarantee the correct functioning of the stabilizer. Turn on the stabilizer only when the smartphone is mounted, otherwise motors might be damaged. Vibrating is normal for the first few seconds after turning on the stabilizer. It will disappear when the motor's auto-adjustment is done. - Page 13 F A Q 1. The stabilizer can't stabilize or motors are powerless after booting. Ensure that the smartphone has been mounted and balanced correctly on the stabilizer. 2. Vibration happens when using the stabilizer in normal way. Default value of motor strength is a bit high so that the stabilizer can work properly in portrait mode.
-
Page 14: Certification And Compliance
Certification and Compliance FCC ID: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 15 twitter.com/jobyinc instagram.com/jobyinc facebook.com/jobyinc youtube.com/jobyinc © 1996-2019 Vitec Imaging Solutions Spa Via Valsugana, 100 36022 Cassola (VI) Italy...