Advertisement
23. Enclosure preparation
q Cut the thread in the holes for the en-
closure feet in one of the aluminum
profiles, using the supplied special
M4 screw as a tap.
q Cut the thread in the front and
back of the aluminum profiles,
using the supplied special M4
screw (4 holes per piece)
q Mount the feet on the aluminum pro-
file, using four M4 hexagonal Allen
screws. Use the supplied Allen
wrench. It is advisable to stick the pro-
tection adhesive onto the feet.
q Mount the valve pro-
tection covers on one
of the aluminum pro-
files. Use four M4 hex-
agonal Allen screws.
Enclosure preparation
FIG. 1
FIG. 3
FIG. 4
FIG. 2
17
Advertisement
