Temporary Installation; Electrical Installation - Dehutech 450 Technical Manual

8

Temporary installation

With temporary installations for water damage
or building drying, flexible plastic ducts would
normally be used instead of the spiral duct type.
The drying method differs depending on situa-
tion and construction to be dried. The complete
room could be dehumidified, or just the dam-
aged part. For the later option plastic sheet is
used to cover the damaged area, and the dry air
is supplied under the sheet. For both options the
wet air must be exhausted out from the building
via flexible duct, or alternatively connected to
the general exhaust ventilation system for the
building.

Electrical installation

See the electrical wiring diagram on page 16.
Subject to change without notice DehuTech 450