Advertisement
SmartBirght LED Batten
BN013C
Mounting Instruction
Please read this manual carefully before using the product.
1. For indoor use only.
2.
Do not switch on before complete installation.
3. The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical
regulations or the national requirements.
4. The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be
destroyed.
5. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire
shall be replaced.
6. The luminaire is complied with AS/NZS 60598.
7. Luminaire must not be used or stored in corrosive environment where hazardous materials such as Sulphur, Chlorine,
phthalates,
etc., are present.
8. This product allows maximun10 pcs trunking (via connector or end to end trunking). For your safety concern, the
connection of BN013C with any other product is prohibited. And make sure to keep the last male socket open.
9. Max current of power cable: 2A.
This marking indicates that this product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
Philips Lighting Luminaires (Shanghai) Co., Ltd.
Address: 2F, Building 6, No. 1805, Huyi Highway, Malu Town,
Jiading District, Shanghai, P.R. China
Postal code: 201801
V1.0
Advertisement
