Physigait Lab Elements; Gait Recording With Physilog ® 5 - Basics - Gait up PhysiGait Lab User Manual

1. PhysiGait Lab elements

2. Gait recording with Physilog
Attach
Fix the sensors on the
feet/ shoes using the
rubber clips or foot
attachment straps.
Stop
Stop the sensors* by
pushing the main button
for 3 seconds until the LED
turns orange. The LED
blinks green 3 times when
the sensor is correctly
stopped.
* See section 5.2 for early
firmware versions
PhysiGait Lab user manual v1.3.1 Date: 29.04.2019
Copyright ©2018, All Rights Reserved - Gait Up SA. CH-1015 SWITZERLAND
®
5 - Basics
Start
Start the recording by
pushing the main button
for 2 seconds, the LED
becomes green and turns
off when the sensor is
starting.
Plug
Connect the Physilog® to
the computer via the USB-
micro USB cable
EPFL Innovation Park, Bat C. CH-1015 Lausanne
Wait until the two sensors
blink green
synchronously
and ask the subject to
walk according to your
protocol.
Save to PC
Copy-paste the .BIN files
from the Physilog® to the
computer for analysis
Gait Up SA
www.gaitup.com
TVA CHE-145.136.760
Walk
3