Installing The Thread Stand - JUKI LG-158 Instruction Manual

❼

2. INSTALLING THE THREAD STAND

❹
❺
❻
❽
❶
5) Installation of the machine
Put the sewing machine head on the table with the sewing
machine head and hinge seats ❸ aligned.
Fix hinge seat ❸ with screw ❹ , washer ❺ and nut ❻ sup-
plied with the machine.
6) Installing the coupling chain
Attach chain ❽ supplied with the unit to S-shaped fi tting ❼
which has been installed on the presser lifting lever.
Install S-shaped fi tting ❿ and chain ⓫ to changeover link
spring peg plate ❾ .
Bring down chains ❽ to ⓫ respectively from the oil pan to
connect to the table stand.
❿
⓫
Assemble the thread stand device. Fit it in the hole in the table.
Tighten locknut ❶ so that the thread stand does not fl uctuate.
– 2 –
❾