Advertisement
2. introduction & sPecification
High velocity drum fans suitable for movement of huge volumes of air. robust unit with heavy duty gauge steel casing, guard and frame.
Handle, wheels and tilt function cradle stand allow the control of air flow to exactly where it is needed. carefully balanced and fully guarded
blades provide quiet and safe operation. Fitted with Bs fully approved plug. suitable for use in industrial, commercial, agricultural, automotive
and showroom applications.
Model no. ..................................... hvd24.v2 ........................... hvd30.v2 ...............................hvd36.v2
Fan diameter ..............................610mm (24") ........................760mm (30") ...........................915mm (36")
speeds ......................................................... 2 .......................................... 2 ..............................................2
speed range .......................... 1300-1400rpm ..................... 1100-1200rpm ............................ 800-900rpm
maximum Airflow ....... 220mtr³/min (7,750cfm) ..... 285mtr³/min (10,020cfm) ........ 297mtr³/min (10,500cfm)
motor Power ...................................190-250W ............................300-355W ............................... 350-460W
supply..................................................... 230V .................................... 230V ....................................... 230V
current..................................................... 1.1A ..................................... 1.5A ........................................ 2.1A
3. oPeration
Warning! ensure that you read, understand and apply safety instructions in section 1 before using fan.
3.1.
check that the speed control is set to "0" (off) and then plug into the mains power supply and switch the power on.
3.2.
the fans feature 2 speeds which are selectable using the switch located at the back of the fan, above the motor.
3.3.
Adjust the direction of the air flow by moving from side to side and tilting the fan up or down as required.
3.4.
When you have finished using the fan ensure you turn the speed control switch to "0" (off) and disconnect the fan from the mains
power.
4. care of fan
Warning! ensure that the fan is disconnected from the mains power supply before attempting any of the following:
4.1.
use a soft, damp cloth to clean the fan.
do not immerse the fan in water and never allow water to drip onto the motor housing. do not use solvents, petroleum, paint
thinner or other chemicals to clean the fan.
4.2.
to clean the fan blade, undo the cross headed screws around the circumference, remove the grille and clean the blade with a
slightly damp cloth. replace the grille as required and refit the cross headed screws.
4.3.
should the motor, switch or the power lead require service or maintenance contact your local service agent.
4.4.
When not in use place the fan in its original box or otherwise cover to protect from dust, and store in a safe, dry, childproof
location.
hvd24.v2
environmental Protection.
recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMPortant: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
inforMation: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack sealey limited
hvd30.v2
sole uK distributor, sealey group,
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk,
IP32 7Ar
Original Language Version
hvd36.v2
Weee regulations.
dispose of this product at the end of its working life in compliance
with the eu directive on Waste electrical and electronic equipment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. contact your local solid waste
authority for recycling information.
01284 757500
01284 703534
HVd24.V2, HVd30.V2 & HVd36.V2
www.sealey.co.uk
sales@sealey.co.uk
Issue: 3 (l) - 24/03/14
Advertisement
