The Control Panel; G Water Full Indicator Light; G Buttons; G Mains-On Light - Zanussi TC 485 W Instruction Booklet

The Control Panel

1 Programme Chart
This will help you to select the correct time for
drying.
2 Water Full Indicator Light
(red)
This light illuminates when the reservoir is full or
improperly fitted.
The programme will be interrupted.
3 «Delicates» Button
Depress this button when drying delicate items. The
heating element will work at half power at short
intervals.
4 «Synthetics» Button
Depress this button when drying synthetic items. The
heating element will work at half power.
5 «Cottons» Button
Depress this button when drying cotton or linen
items. The heating element will work at full power.
Cool Tumble
If none of the buttons are depressed, the heat is
cut off. This is particularly useful to freshen the
laundry.
If two or all the buttons are pressed together, the
machine will carry out the drying programme at
the lowest temperature to prevent damages to the
laundry.
6 Door Open Button
Depress this button to open the door.
The door of the machine can be opened at any time
during the programme if you want to feel the dryness
of the fabrics.
7 Mains-On Light (orange)
This light indicates operating status.
8 Time Selector Dial-On/Off
Switch
Turn the dial clockwise (to the right) to select the
time for drying (see Chart page 6). At the same time
the machine is switched on and the programme starts.
This dryer has a drying cycle of up to 140 minutes.
When selecting the drying time you should remember
that it includes a 8 minute cooling phase (position
on the dial).
This phase should not be shortened, stopped or
avoided, as this could cause skin burns or damages to
the laundry.
5