Table of Contents
Advertisement
Downloaded from:
http://www.usersmanualguide.com/
Installation
Installation of Display unit
ÅúInstallation w ithout using the trim m ount plateH
Display unit
ÅúInstallation using the trim m ount plateH
C D A U T O C H A N G E R C O N T R O L L E R
D I S C
T R A C K
'
M . R D M
D . R E P
D . S C N
D I S C
T R A C K
RWR
1
¡
4
Pass the cable from the Display unit through the hole on the trim mount plate and push fit
the Display unit into the trim mount plate until it locks.
2CA U TION
• Be sure not to place the unit on such place as w here it is exposed to direct sunlight and
temperature eventually rises.
It results in the deformation of the case.
• Depending on the installing location, the display unit may not be able to receive the
signals from the controller unit. Install them after confirming that the signals can be
received.
• Install the unit in such a w ay that it does not disturb driving.
26
Attach one velcro to the slanted-line of the the
display units as show n above, and attach the
other velcro to the parts w here you w ish to
attach the display units.
Then, put velcros together and install the display
units.
F
REP
RDM
3
8 /
Display unit
¢
H
Advertisement
Table of Contents
