Sony a7SIII Help Manual page 419

Help Guide
Interchangeable Lens Digital Camera
ILCE-7SM3
α7SIII
Connecting the camera and a smartphone using the QR Code
You can connect your smartphone to the camera using the QR Code. You can connect to the camera with the same
operation on any Android smartphone, iPhone, or iPad.
To connect the camera and your smartphone, Imaging Edge Mobile is required. Download and install the application
Imaging Edge Mobile from your smartphone's application store. If Imaging Edge Mobile is already installed on your
smartphone, be sure to update it to the latest version. For details on Imaging Edge Mobile, refer to the support page
(https://www.sony.net/iem/).
Display the QR code screen on the camera.
1
When using a smartphone as a remote controller:
MENU → (Network) → [Transfer/Remote] → [Ctrl w/ Smartphone] → Perform the following operations.
Set [Ctrl w/ Smartphone] to [On].
Execute [ Connection].
When transferring images to your smartphone:
MENU → (Network) → [Transfer/Remote] → [Send to Smartphone] → [Select on This Device] → Select
images to transfer.
To select images on your smartphone, choose [Select on Smartphone].
Launch Imaging Edge Mobile on your smartphone and select [Connect with a new camera].
2
Scan the QR Code displayed on the camera while the [Connect using the camera QR Code] screen is
3
displayed on the smartphone.
Once the QR Code has been read, a message [Connect with the camera?] will be displayed on the smartphone
screen.
Select [OK] on the smartphone screen.
4
The smartphone is connected to the camera.
Hint
Once the QR Code has been read, this camera's SSID (DIRECT-xxxx) and password are registered to the smartphone. This
enables you to easily connect the smartphone to the camera via Wi-Fi at a later date by selecting the camera from the camera list
in Imaging Edge Mobile. (Set [Ctrl w/ Smartphone] to [On] in advance.)
419