Sony a7SIII Help Manual page 305

Help Guide
Interchangeable Lens Digital Camera
ILCE-7SM3
α7SIII
Changing the function of the dial temporarily (My Dial Settings)
You can assign the desired functions to the front dial, rear dial, and control wheel, and register up to three combinations
of settings as "My Dial" settings. You can quickly recall or switch registered "My Dial" settings by pressing the custom key
you assigned in advance.
Registering functions to "My Dial"
Register the functions that you want to assign to the front dial, the rear dial, and the control wheel as [My Dial 1] through
[My Dial 3].
1.
MENU →
(Setup) → [Dial Customize] → [My Dial Settings].
2.
Select a dial or wheel for
3.
Select the desired function to assign using the top/bottom/left/right sides of the control wheel, and then press the
center of the control wheel.
Select "--" (Not set) for a dial or wheel to which you do not want to assign any function.
4.
After you select functions for all of the dials and the wheel in
The settings for (My Dial 1) will be registered.
If you want to register
Assigning a key to recall "My Dial"
Assign a custom key to recall the registered "My Dial" settings.
1.
MENU → (Setup) → [Operation Customize] → [
the key that you want to use to recall "My Dial."
2.
Select the number of the "My Dial" setting that you want to recall or the pattern for switching "My Dial."
Menu item details
My Dial 1 during Hold /My Dial 2 during Hold/My Dial 3 during Hold:
While you hold down the key, the functions that you registered in [My Dial Settings] are assigned to the dial/wheel.
My Dial 1→2→3 :
Each time you press the key, the function changes in the following sequence: "Normal function → Function of My Dial 1
→ Function of My Dial 2 → Function of My Dial 3 → Normal function."
Toggle My Dial 1 /Toggle My Dial 2/Toggle My Dial 3:
The function registered using [My Dial Settings] is maintained even if you do not hold down the key. Press the key again
to return to the normal function.
Shooting while switching "My Dial"
During shooting, you can recall "My Dial" using the custom key, and shoot as you change the shooting setting by turning
the front dial, the rear dial, and the control wheel.
In the following example, the functions listed below are registered to "My Dial," and [My Dial 1→2→3] is assigned to the
C1 (Custom 1) button.
(My Dial 1), and press the center of the control wheel.
(My Dial 2) and (My Dial 3) as well, follow the same procedure as described above.
(My Dial 1) by repeating Steps 2 and 3, select [OK].
Custom Key Setting] or [
305
Custom Key Setting] → Select