Sony a7SIII Help Manual page 178

Help Guide
Interchangeable Lens Digital Camera
ILCE-7SM3
α7SIII
Zebra Display
Sets a zebra pattern, which appears over part of an image if the brightness level of that part meets the IRE level that you
have set. Use this zebra pattern as a guide to adjust the brightness.
MENU → (Exposure/Color) → [Zebra Display] → Select a menu item and set the desired parameter.
1
Menu item details
Zebra Display:
Sets whether to display the zebra pattern. ([Off] / [On])
Zebra Level:
Adjusts the brightness level of the zebra pattern. ([70] / [75] / [80] / [85] / [90]/ [95] / [100] / [100+])
Hint
You can register values to check the correct exposure or overexposure as well as the brightness level for [
settings for correct exposure confirmation and overexposure confirmation are registered to [Custom 1] and [Custom 2]
respectively in the default settings.
To check the correct exposure, set a standard value and the range for the brightness level. The zebra pattern will appear on
areas that fall within the range you set.
To check the overexposure, set a minimum value for the brightness level. The zebra pattern will appear over areas with a
brightness level equal to or higher than the value you set.
Note
The zebra pattern is not displayed on devices connected via HDMI.
5-021-326-11(1) Copyright 2020 Sony Corporation
178
Zebra Level]. The