Table of Contents
Advertisement
Replacement of the Nordzone™ System original filter
!
CAUTION!
Voltage: Turn off the ignition to avoid the risk of electric shock.
IMPORTANT! Matching product version: Make sure that the product version
!
matches the vehicle model.
Product functionality: Use only the Nordzone System original filters to ensure proper
function of the Nordzone System, and to qualify for warranty.
1. Make sure the ignition is turned off. Locate the filter compartment. The location differs
depending on vehicle model.
2. Remove the cover(s), unscrew the nut and remove the inner lid.
3. Disconnect the main power cord.
4. Remove the used Nordzone System from the filter compartment.
CAUTION! Avoid inhaling the particles from a used filter.
5. Remove the power unit from the corner of the filter. Remove the particle charger unit from
the filter by pressing the clips. CAUTION! The particle charger unit has sharp tips that
may cause minor injury if not observed.
6. Properly dispose of the used air filter.
7. Attach the power unit of the particle charger unit to the corner of the new Nordzone
System filter.
8. Press the particle charger unit onto the pleats of the new filter. Make sure to match the
printed outlines on the filter. Check that the unit is completely pressed down. Check that
the cables are not damaged and that they are correctly connected.
9. Vacuum the filter compartment and insert the Nordzone System. Remount the inner lid.
IMPORTANT! Make sure placement is according to the arrows printed on the filter.
10. Reconnect the main power cord to the Nordzone System filter. The installation is
successful if the LED of the product indicates green when ignition is turned on. If it
indicates red or does not light up, see section Troubleshooting.
11. Remount the cover(s), if any.
© 2020 CabinAir Sweden AB. All rights reserved.
15
Advertisement
Table of Contents
