Samsung SMO-210TP User Manual page 39

e-38
HIDDEN CAMERA
• Select "HIDDEN CAMERA..." using the Rotary Wheel and press ENTER to display
the following screen.
[HIDDEN CAMERA]
CH LIVE P.B.
CH1 OFF OFF
CH2 OFF OFF
CH3 ON OFF
CH4 OFF OFF
CH5 OFF OFF
CH6 OFF OFF
CH7 OFF OFF
CH8 OFF OFF
• Turn the Hidden Camera On/OFF of in LIVE Mode and P.B. MODE for each channel.
• Press the MENU button after completing the settings to return to the SYSTEM SETTING
Menu.
SEQUENCE
• Set the Switching Interval for Sequence Mode. You can set the time between 1 sec and
30 sec.
SYSTEM ID
• This function allows the user to control a single monitor using the remote control when
multiple (up to 10) monitors are linked together. Only those monitors with IDs matching
the Remote Control ID will be controlled by the remote control.
CH1 CH2
MONITOR ID: 1 REMOCON ID: 2
CH4 CH5
CH7 CH8
• Setting: The default value of the monitor and the remote control is "1". The value of the
Monitor ID can be set from 0 to 9 by accessing the SYSTEM ID Setup mode under the
SYSTEM SETTING menu. Press the SYSTEM ID button on the remote control to
display the Monitor ID and the Remote Control ID as shown above. With system ID
button pressed, enter the desired number by pressing the corresponding button (0 to 9) to
set up the Remote Control ID. The OSD will disappear three seconds after the last button
is pressed.
CH3
CH6