Installing Your Vcr Connecting The Cables - Sharp VC-M35SM Manual

TINS-3799UMZZ ENGLISH.book Page 4 Thursday, April 20, 2000 9:23 AM
INSTALLING YOUR VCR
CONNECTING THE CABLES
Connect the VCR to the
mains
(
Model shown is
VC-M35SM )
Optional:
Connect your
Satellite receiver or decoder to
the VCR using a scart lead to
LINE 2 IN/DECODER
socket on the VCR.
MODEL VC-M35SM ONLY
DECODER UNIT
OR SATELLITE SYSTEM
Connect your TV
to the VCR using
the supplied rf
connection cable,
i.e. connect the
VCR RF OUT
socket to the TV
AERIAL IN
socket.
Optional
have a scart lead connect it to your TV and
LINE 1 IN/OUT
✔
The VCR is correctly connected.
GB-4
AERIAL OR
CATV CABLE
Connect your existing aerial
ANTENNA IN
cable to the
socket on your VCR.
BACK OF
TELEVISION
SCART (not supplied). If you
socket on the VCR.