Daping DP18-Pro User Manual page 4

Method of operation
How to turn on the power and starting recording:
First turn on the power/record button, then start the recording after
the power light flashes red. (Note: This product will automatically
create one recording file every 120 minutes. Please note that when
the SD card is full, the power light will flash purple 10 times and
you can no longer record.(By changing the software, you can set
the power light to stay on or off during recording. Please see "
Common Problems" at the end of the manual.)
How to turn off the power/Save the recording file:
Turn off the power/record button to turn off the power.
Note: If you connect the USB conversion adapter and remote
control during recording, the recording will be saved automatically,
and go to playback mode.)
Play recording/music
Directly play the recording file on the recorder
(1) Connect the product to the USB conversion adapter.
(2) Connect the earphones to the remote control earphone
jack. (As shown below).
3