Table of Contents
Advertisement
03TA Service Manual
Only service personnel experienced and certified in refrigeration and qualified to work
with high voltage electrical equipment should be allowed to install or work
To activate the machine warranty, the Product Registration Form MUST be
completed and returned to the factory promptly after the official start-up.
Product Registration Form is located in the Owners Packet or can be found
online at www.vogtice.com/registration.htm.
Bin Installation
Screw these legs to the bottom of the bin. You can make MINOR leveling adjustments by using
these legs as leveling screws, as outlined in the manufacturer's instructions.
Setting the ice machine on the ice bin
machine can be elevated and placed on the bin top. Using the dimensions in FIGURE 3-1 below,
mark the machine footprint on the bin top by measuring over from the ice chute opening.
3. Installing Your Tube-Ice
!
on this Tube-Ice
!
Important Notice.
Set the bin on solid, level footing. Inside the bin you will find the four legs.
MINIMUM BIN OPENING - 6 1/2" x 6 1/2"
MAXIMUM BIN OPENING - 7" x 7"
ICE BIN
CHUTE SIZE - 5 5/8" X 5 5/8"
6 1/2"
FRONT OF MACHINE
Ice Chute Location/Machine Footprint
®
Machine
WARNING
!
®
machine.
WARNING
!
Once the ice storage bin is level, the Tube-Ice ®
4'-2"
6 1/2"
2'-3 1/16"
1'-2 1/4"
PLAN
FIGURE 3-1
INSTALLING YOUR TUBE-ICE
2'-5"
3-1
®
MACHINE
Advertisement
Table of Contents
