Advertisement
■ Optional Parts
● Pad and Drum Trigger Grouping
q DTX Series
Drum Trigger Module
r PCY150S
Cymbal Pad
u Foot Pedal
FP-7210 etc.
● Monitor System and Attachment Grouping
• SPAT1
Speaker Attachment
• MS50DR
• Satellite
• Sub Woofer
Speakers
amp unit
Step
3
Drum Trigger
Module
Step 3-2
Step 3-1
Downloaded from:
http://www.usersmanualguide.com/
w TP65/65S
e PCY130/130S
Drum Pad
Cymbal Pad
t RHH130
y Hi-hat stand
Real Hi-hat Pad
*HS740 etc.
i KP65
Kick Pad
• TPCL65
• CYAT65
Tom Holder
Cymbal Attachment
• MS100DR
• Satellite
• Sub Woofer
Speakers
amp unit
Module Holder
Holder Clamp
■ Set up example
Satellite Speaker
q
RHH130
t
Sub Woofer amp unit
y
Step
4
Felt
Cymbal Pad
(PCY130/130S/150S)
Anti-swivel brace
(supplied with the
(PCY130/130S/150S)
Make sure all bolts on clamps, pads, etc., are firmly tightened.
Loose or over-tightened bolts may result in the part falling off and/or
damage. Please use caution.
After assembly is complete, setup the kick pad, real hi-hat pad, etc.,
and connect the cables. Use the supplied cable bands to secure the
cables to the frame pipes to keep cables out of the way during per-
formance.
If the rack is moved even after setup is complete, make sure the
bolts are loosened before moving the rack.
Step
5
Drum Pad
PCY150S
PCY130S
r
e
PCY130
e
w
w
w
i
TP65S
u
4
Attaching the cymbal pads
Attach the cymbal pads to the cymbal hold-
ers and adjust their position, then secure in
place.
(Please refer to the Owner's Manual that
came with the cymbal pads on attaching the
cymbal pads.)
5
Attaching the drum pads
Attach drum pads to the hexagonal rod cyl-
inder and adjust their position, the secure
in place.
Satellite Speaker
Printed in Indonesia
WG24080
Advertisement
