Page 1: Table Of Contents
Installation Instructions Industrial Performance Monitors Catalog Numbers 6186M-12PN, 6186M-12PT, 6186M-15PN, 6186M-15PT, 6186M-15PNSS, 6186M-15PTSS, 6186M-17PN, 6186M-17PT, 6186M-17PNSS, 6186M-17PTSS, 6186M-19PN, 6186M-19PT, 6186M-19PNSS, 6186M-19PTSS Topic Page Important User Information About This Publication Summary of Changes Hazardous Locations Control Drawing - Class I Division 2 and Zone 2 (USB Port-Type A) Control Drawing - Class I Division 2 and Zone 2 (USB Port-Type B) Application Information European Union Directive Compliance...
Page 2: Important User Information
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment.
Page 3: About This Publication
Revised “Secure the Cables” paragraph Revised typical luminance value for 1700M monitor Revised contrast ratios for 1200M and 1500M monitors Revised typical response time for all monitors Revised UL Listed and cUL Listed certifications Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 4: Hazardous Locations
The monitor may be powered directly from the included AC adapter (100...240V AC input), or an external 9...36V DC power source wired to the terminal block. Do not use the AC adapter and external DC power at the same time. Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 5 Les écrans et l'adaptateur c.a. ont le code de température T4, c'est-à-dire une température de fonctionnement maximum de 135 °C pour une température ambiante de 50 °C. N’installez pas les écrans dans des environnements contenant des gaz atmosphériques inflammables à moins de 135 °C. Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 6: Control Drawing - Class I Division 2 And Zone 2 (Usb Port-Type A)
The maximum total inductance, L and cable inductance of each i (peripheral), separate USB peripheral device shall be less than or equal to L a (USB). ≤ L i (peripheral) cable a (USB) Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 7: Control Drawing - Class I Division 2 And Zone 2 (Usb Port-Type B)
0 μH Total Inductance of the 6186M USB Type B connector. The host product must be capable of iB (USB) tolerating this value of inductance. ≥ L a (Host USB) iB (USB) cable Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 8: Application Information
75 W of AC power directly from the public mains. Backlight Assembly Disposal ATTENTION: The backlight assembly in this unit contains mercury. At the end of its life, this equipment should be collected separately from any unsorted municipal waste. Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 9: Environment And Enclosure Information
Keep the original packing material in case you need to return the product for repair or transport it to another location. Use both the inner and outer packing cartons to be sure of adequate protection for a unit returned for service. Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 10: Parts List
• The enclosure must have sufficient space around air inlets and outlets to provide the circulation necessary for cooling. Never allow air passages to become obstructed. Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 11 ATTENTION: Industrial computers and monitors are not safety devices. Standard safety practice and redundancy should be followed in the application of this product. • When mounted, the product cannot be tilted more than 60° from vertical. ≤60° ≤60° from vertical from vertical Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 12: Installing The Monitor
Optional adapters are available to mount a monitor into the existing panel cutout of an older monitor. Cat. No. Description 6189V-MMA12 Panel adapter for converting 6185-B to 1200M 6189V-MMA15 Panel adapter for converting 6185-C/F/H to 1500M 6189V-MMA17 Panel adapter for converting 6185-D/J to 1700M Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 13 238.0 x 318.0 mm (9.37 x 12.51 in.) 1500M 285.6 x 386.6 mm (11.24 x 15.22 in.) 1700M 329.5 x 424.0 mm (12.97 x 16.69 in.) 1900M 363.5 x 449.6 mm (14.31 x 17.70 in.) Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 14 ATTENTION: Tighten the mounting clips to the specified torque to provide a proper seal and prevent damage to the product. Rockwell Automation assumes no responsibility for water or chemical damage to the product or other equipment within the enclosure because of improper installation.
Page 15 The cabinet height must accommodate the monitor’s panel height. • The cabinet depth must accommodate the monitor’s depth plus rear clearance for cables and airflow. A cabinet depth of 112 mm (4.4 in.) is sufficient. Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 16 (1.25 in.) on centers, in a repeating pattern. The universal rails have a hole pattern that contains the wide pattern but provides an additional hole at the midpoint of the pattern. Universal rails are prevalent in the United States. Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 17 The illustration shows the mounting holes for VESA FPMPMI standard 100 mm (3.94 in.) interface pad. Installing Arm Installing Monitor to Arm Monitor Mounting Holes (4) 3. Tighten the screws. Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 18: Din Rail Mounting Of The Ac Power Adapter
DIN rail ( ), then pressing the AC adapter firmly against the lower edge of the rail ( ). 6. Secure the installation by tightening the fastener on the DIN-rail bracket ( ). Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 19: Product Dimensions
Industrial Performance Monitors 19 Product Dimensions The product dimensions for the monitors are in mm (in.). 1200M Monitor 315 (12.40) 26.6 (1.05) 291 (11.46) 60.5 (2.38) 5.5 (0.22) 340 (13.39) Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 20 20 Industrial Performance Monitors 1500M Aluminum Bezel 383.6 (15.10) 296 (11.65) 28 (1.10) 60.55 (2.38) 5 (0.20) 409.98 (16.14) 50.80 (2.00) Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 21 Industrial Performance Monitors 21 1500M Stainless Steel Bezel 383.6 (15.10) 296 (11.65) 26 (1.04) 60.55 (2.38) 4.3 (0.17) 410 (16.14) 50.80 (2.00) Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 22 22 Industrial Performance Monitors 1700M Monitor - Aluminum Bezel 421.5 (16.59) 296 (11.65) 28 (1.10) 60.55 (2.38) 5 (0.20) 451.98 (17.79) 73.30 (2.89) Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 23 Industrial Performance Monitors 23 1700M Monitor - Stainless Steel Bezel 421 (16.57) 296 (11.65) 27.8 (1.09) 60.15 (2.37) 4.3 (0.17) 452 (17.80) 72.75 (2.86) Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 24 24 Industrial Performance Monitors 1900M Monitor - Aluminum Bezel 446.6 (17.58) 31.5 (1.24) 325 (12.80) 63.9 (2.52) 4.2 (0.17) 482.6 (19.0) 75.25 (2.96) Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 25 Industrial Performance Monitors 25 1900M Monitor - Stainless Steel Bezel 446.6 (17.58) 325 (12.80) 31.5 (1.24) 64.0 (2.52) 4.3 (0.17) 482.6 (19.0) 75.25 (2.96) Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 26: Monitor Connections
Power input, DC terminal block computer Serial port (RS-232) for touch screen Functional ground screw interface Aluminum Bezel Item Description Front access panel USB device port, Type A (aluminum bezel only) USB key Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 27 1. Connect one end of the digital video cable to the female, DVI video input connector on the monitor. 2. Connect the other cable end to the output of any digital DVI video source. For a DVI cable longer than 5 m (16.4 ft), use a DVI cable extension. Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 28 1. Connect the USB Type A male connector end of the included USB cable to the USB Type A female connector located on the monitor. 2. Connect the USB Type B male connector on the USB cable to the USB B Type female connector on the host computer. Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 29 Performing a Calibration 1. After installing the driver software, follow the calibration instructions in the touch screen documentation. 2. Following installation of the touch screen software and calibration, the touch screen is ready to use. Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 30: Power Source Connection
( ) and secure this connection by screwing the barrel over the threads ( ). WARNING: In a hazardous location installation, secure the AC power cord by using the included metal cage. Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 31 Terminals screws DC power wires 3. Tighten the screw terminals to provide a good connection. 4. Secure the terminal block connector to the unit by using the two side screws. 5. Restore DC power. Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 32: Ship Or Transport Product
Doing so may cause damage to the product. You must uninstall the product and place in its original packing material before shipping. Rockwell Automation is not responsible for damage incurred to a product that is shipped or transported while installed in a machine, panel, or rack.
Page 33: Specifications
(1) At 40 °C (104 °F) operating temperature, the humidity must not exceed 90%. At 50 °C (122 °F) operating temperature, the humidity must not exceed 50%. Operating the monitors beyond these limits for extended periods of time can reduce the life of the product. (2) For operating and non-operating conditions. Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 34: Additional Resources
For additional information on the industrial monitors, refer to the Industrial Performance Monitors User manual, publication 6186M-UM002. You can view or download publications at http://www.rockwellautomation.com/literature. To order paper copies of technical documentation, contact your local Allen-Bradley® distributor or Rockwell Automation sales representative. Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 35 Industrial Performance Monitors 35 Notes: Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011...
Page 36 Rockwell Automation representative. New Product Satisfaction Return Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned, follow these procedures.

This manual is also suitable for:

Allen-bradley 6186m-12pt Allen-bradley 6186m-15pn Allen-bradley 6186m-15pt Allen-bradley 6186m-15pnss Allen-bradley 6186m-15ptss Allen-bradley 6186m-17pn ... Show all

Rockwell Automation Allen-Bradley 6186M-12PN Installation Instructions Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Rockwell Automation Allen-Bradley 6186M-12PN

Summary of Contents for Rockwell Automation Allen-Bradley 6186M-12PN

This manual is also suitable for:

Table of Contents