Related Manuals for Comelit IPTHPAN02FA
Summary of Contents for Comelit IPTHPAN02FA
- Page 1 Temperature Measurement & Face Recognition Terminal Art. IPTHPAN02FA Please read this manual thoroughly before use and keep it for future reference...
- Page 2 1 – Package content Device Tapping Screw ×4 Quick Start Guide Drill Template Plastic Plug ×4 2 – Overview White 161.8 30.8 light Microphone IR light Cameras Micro-SD card slot Reset Display 18-pin USB port interface Speaker card slot Power Wrist supply mesurement...
- Page 3 Power input Alarm input 1 Alarm input 2 Alarm output 1 Alarm output 2 RS485 Wiegand interface Lock Exit button Ethernet +12V Power input Earth Alarm input 1 Alarm Input Device Alarm input 2 Alarm Input Device Alarm Output Device Alarm output 1 Alarm Output Device Alarm output 2...
- Page 4 4 – Installation Ambient illumination requirement Make sure that the faces can be captured clearly. Avoid direct sunlight and backlight The device should be at least 2 meters away from the light, and at least 3 meters away from windows or doors Installation Use two screws to secure the Paste the drill template...
- Page 5 5 – Network ① Make sure that the device and the PC are connected via LAN ② Install the software Comelit Advance IP Tool and run it as shown below: ③ Modify the IP address. The default IP address is 192.168.1.150. Click the information of the camera listed in the above table to show the network information on the right hand.
- Page 6 ④ Double-click on the device listed in the Comelit Advance IP Tool or manually enter the IP address in the address bar of Internet Explorer browser to connect it. Follow the instructions to download and install the plugin. ⑤ Enter the Username and the Password in the login interface.
Need help?
Do you have a question about the IPTHPAN02FA and is the answer not in the manual?
Questions and answers