Table of Contents
Advertisement
Before washing for the first time
Wash once without any laundry
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load
Observe the important information
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
our liquid detergent into the appropriate dispenser and place in the drum.
Dilute thick fabric softener and fabric conditioner with water.
This prevents blockages.
Setting** and adjusting programmes
**If the
panel, the childproof lock is active
Display panel/
option buttons
Additional function and options buttons
If the buttons are held for longer, the
appliance automatically runs through the
setting options.
- 800*
(Rpm)
Select the spin speed (* depending on the model) or - - - -
(no final spin, laundry soaks in the last rinsing water,
display panel - - - -)
(
)
.
Selecting the temperature
°C
(Temperature °C)
24h
(Finished in) Programme end after
Childproof lock
page 9.
page 7.
page 6.
Measure accordingly:
1
symbol flashes in the display
Deactivate, page 5.
Individual settings, page 5.
Select
/
2
(Start/Pause)
page 5
Washing
Detergent drawer with
compartments I, II,
Drum
Control panel
Washing machine
door
Service flap
Washing
3
Removing the washing
Open the washing machine door and remove the washing.
If - - - - (without final spin) is active: Turn the programme
selector to
(Empty) or select the spin
speed.
Select
/
(Start/Pause).
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for AquaStop models
instructions
Switching off
Turn the programme selector to Off.
End of programme when ...
... the status indicator
(Spin) flashes and
appears in the display panel.
Interrupting the programme
Programmes at high temperatures:
3
– Cool washing: Select
– Select
/
(Start/Pause).
Programmes at lower temperatures:
–
/
(Rinse/Spin) (deactivate
. (Extra rinse)) or select
– Select
/
(Start/Pause).
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Select
/
(Start/Pause). The new
programme starts from the beginning.
Refer to installation
/
(Rinse/Spin).
(Empty).
4
Advertisement
Table of Contents
