Siemens SIMATIC PCS 7 Function Manual page 175

Result
The following figure shows the redundant network connection to the automation system for
both Route Control servers in NetPro. The example plant is configured with a redundant fault-
tolerant plant bus. Each PC station and each CPU is connected to the plant bus with 2 network
adapters:
Additional information
● Section "How to configure a fault-tolerant plant bus (Page 112)"
● You can find information about the Route Control wizards in the manual
System PCS 7; SIMATIC Route Control .
● Online help for
Fault-tolerant Process Control Systems (V8.1)
Function Manual, 11/2014, A5E34878832-AA
STEP 7
Advantages of fault-tolerant components
4.7 SIMATIC Route Control stations
Process Control
175