ALDI Workzone CSD40QU User Manual page 17

4V Li-Ion Screwdriver
B5
Installing the extension shaft with bit (11) (See Fig. C1-C3)
The screwdriver is equipped 2 x extension shafts (11). Use the extension
shaft (11) to extend the reach of the driver into recessed areas.
1) Select a desired bit, push the top slide cover (4) forwards to engage it.
2) Remove the original bit by hand and insert either of the the
extension shafts (11) into the chuck (2).
3) Inert the bit into the shaft (11).
C1
Charging the screwdriver (See Fig. D)
NOTE: The battery charger supplied is only for the
Li-ion battery installed in the machine. Do not use
another battery charger.
The Li-ion battery is protected against deep
discharging. When the battery is empty, the
machine is switched off by means of a protective
circuit and the tool holder no longer rotates.
AFTER SALES SUPPORT
1300 889 028
AUS
(toll free)
B6
C2
B7
C3
e-mail: info.aldi@positecgroup.com
MODEL No.: CSD40QU • 10/2019 10997
AUS
17