ALDI Workzone CSD40QU User Manual page 11

g) Keep power tool clean and dry.
h) Wipe the charging terminals with a clean dry cloth if they
become dirty.
i) Power tool needs to be charged before use. Always refer to
this instruction and use the correct charging procedure.
j) Do not maintain power tool on charge when not in use.
k) After extended periods of storage, it may be necessary to
charge and discharge the power tool several times to obtain
maximum performance.
l) Battery gives its best performance when it is operated at
normal room temperature (20 °C ± 5 °C).
m) When disposing of cells, keep cells of different
electrochemical systems separate from each other.
n) Recharge only with the charger specified by the
manufacturer. Do not use any charger other than that
specifically provided for use with the equipment. A charger
that is suitable for one type of battery may create a risk of fire
when used with another battery.
o) Keep power tool out of the reach of children.
p) Retain the original product literature for future reference.
q) Dispose of properly.
r) Do not mix cells of different manufacture, capacity, size or
type within a device.
s) Do not use any cell which is not designed for use with the
equipment.
General Safety Warnings for Battery Charger
WARNING: Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
11 11
11