Panasonic HX-A100 Firmware Upgrade page 2

2
Make the connection settings for the access point mode to use
devices connected to a wireless router, etc.
≥ Enter the SSID and password (authentication key) of the access point.
≥ If your device is Android, you can enter them using
∫ When connecting by
1 Tap .
2 Tap the wireless access point to connect.
3 Enter password.
≥ This allows you to operate this unit via an access point using your smartphone.
3
Make the connection destination settings for a live broadcast.
≥ Enter the SSID and password (authentication key) of the access point.
Up to three access points can be registered. Register the access point you use, such as the
wireless router in your home or the mobile router you use outside.
≥ You can perform a live broadcast by setting the following.
j Make the live broadcast settings. (For the live broadcast settings, refer to the operating
instructions for this unit.)
For compatible access points, see the following support site.
http://panasonic.jp/support/global/cs/e_cam/index.html (This Site is English only.)
≥ The settings can also be made from the Image App menu.
The Wi-Fi Easy Setup function has been added.
You can use the Wi-Fi Easy Setup by settting up a Wi-Fi connection between this unit and a
smartphone.
For settings on the Setup menu, tap
respective items on the Image App screen.
Proceed to complete the setup by following the on-screen instructions.
With [Wi-Fi Easy Setup], you can set the following information:
j Clock information (Synchronise the clock information with that of the smartphone)
j Information on wireless access points (SSIDs and Passwords)
j "LUMIX CLUB" Login ID, Password
*1 In Live broadcasting mode, you can register up to three wireless access points; in Access point
mode, you can register only one access point.
*2 Acquire a Login ID and Password for the "LUMIX CLUB" in advance.
≥ It may take approximately 60 seconds to synchronise the time of the smartphone with that of this
unit.
≥ If your device is Android, you can tap
point information.
2
VQC9868 (ENG)
.
(If the device is Android)
# [Camera Wi-Fi settings] # [Wi-Fi Easy Setup] #
*2
to run an SSID search when setting wireless access
*1