Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Boston Acoustics BRAVO 2
Summary of Contents for Boston Acoustics BRAVO 2
- Page 1 Bravo II High Performance Multi-Purpose Speaker...
- Page 2 Specifications Frequency Response (±3dB) Recommended Amplifier Power Nominal Impedance Sensitivity [1 watt (2.83v) at 1m] Bass Unit Tweeter Crossover Frequency Dimensions (HxWxD) with corner fillers Dimensions (HxWxD) without corner fillers Weight Finish Description The Boston Bravo ™ II is a multi-purpose, high performance compact loudspeaker. The Bravo II, which uses Boston’s patented one-inch aluminum dome VR mounting bracket or rear stand to be mounted or placed virtually anywhere in any room.
- Page 3 How to Connect Your Speakers Correctly wiring your speakers is important for achieving the best sound quality. Wiring should take just a few minutes, but it’s important to do it carefully, since incorrect wiring (such as reversed connections) can result in a poor soundstage and poor bass.
- Page 4 Using the Bravo II on a Flat Surface The Bravo II can be used on a flat surface, such as a table, shelf or the floor. For horizontal placement that angles up at 45º, both corner fillers must be used and the bracket must be removed. For untilted horizontal placement, the rear stand must be used with the mounting bracket attached (see “Mount the Speaker to the Bracket”...
- Page 5 Mount the Bracket to the Wall Decide where to mount bracket. IMPORTANT: See “Ceiling Clearance” on page 6. Determine what mounting holes in the bracket will be used. Mark the holes on the wall or ceiling using bracket as a template. Drill the holes using the appropriate drill bit size to accommodate the mounting hardware that you plan to use (ie, to clear the toggle bolts for hollow surfaces or small enough to allow self-tapping screws in a solid surface).
- Page 6 Ceiling Clearance If the Bravo II is to be mounted so that the top or the side of the speaker will meet a flush surface, either a wall (horizontally) or the ceiling (vertically), then measure the exact distance as shown here from that sur- face to the top or side of the bracket.
- Page 7 Using the Bravo II as a Surround Speaker Two Bravo IIs can be used as surround speakers for Dolby surround sound formats. A third or fourth Bravo II can be added for use with Surround EX and DTS sound formats. In general, best results will be obtained when the surround speakers are placed above ear level and either behind or beside the listening area.
- Page 8 First, contact the dealer from whom you purchased the speakers. If that is not possible, write to: Boston Acoustics, Inc. 300 Jubilee Drive Peabody, MA 01960 U.S.A. We will promptly advise you of what action to take. If it is necessary to return your speaker to the factory, please ship it prepaid.
Need help?
Do you have a question about the BRAVO 2 and is the answer not in the manual?
Questions and answers