Page 1
NA 12.103 A 10 - 2012 Installation Operation Commissioning Maintenance...
Page 3
SOMMAIRE PAGE 1. GENERAL 1.1 General information 1.1.1 Compliance 1.2 Symbols 1.3 Electrical characteristics table 2. USE 2.1 On-board machine electronic control with led bar 2.2 Description of on-board machine 2.2.1 General switching on 2.2.2 Activation 2.2.3 MODE button 2.2.4 Manual heating/cooling selection 2.2.5 Stand-by 2.2.6 Selecting on-board machine electronic control temperature 2.2.7 On-board machine electronic control LED indications...
Page 4
1.1.1 Compliance The CIAT Divio comfort units conform to European directives LVD, EMC, RoHS e RAEE: 2006/95/EC, 2004/108/EC, 2002/95/ EC and 2002/96/EC Symbols The pictograms in the next chapter provide the necessary information for correct, safe use of the machine in a rapid, unmistakable way.
Page 5
2. USE 2.1 On-board machine electronic control with led bar (fig. 2) The command makes the temperature regulation completely autonomous through the AUTO, SILENT, NIGHT and MAX pro- grammes, with a probe positioned in the lower part of in the lower part of the Divio unit, and guarantees anti-freeze security even when in stand-by.
Page 6
2.2 Description of on-board machine (fig.2) 2.2.1 General switching on To manage the Divio comfort unit via the control panel, it must be connected to the mains. If there is a master switch on the mains power supply then it must be switched on. 2.2.2 Activation To activate Divio: - Press the MODE button (fig.2 ref.
Page 7
2.2.8 Error signals (fig. 2 ) If the 4 LEDs (fig. 2 ref. L, M, N, O), if the signal is enabled, indicates that the Divio comfort unit need maintenance. Select the stand-by programme, clean the air filter and then, when you switch the appliance back on, keep the MODE button (fig. 2 ref. Q) pressed for 5 seconds until normal functioning is restored.
Page 8
R.C.S. Bourg-en-Bresse B 545.620.114 CIAT service Habitat Tel. : 0 826 96 31 05 (0,15€ TTC/min) Non-contractual document. As part of its policy of continual product improvement, CIAT reserves the right to make any technical modifications it feels appropriate without prior notification.
Need help?
Do you have a question about the Divio Series and is the answer not in the manual?
Questions and answers