Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CIAT Divio
Summary of Contents for CIAT Divio
- Page 1 NA 12.100 A 10 - 2012 Installation Maintenance...
-
Page 3: Table Of Contents
CONTENTS PAGES 1. GENERAL 1.1 General information 1.1.1 Conformity 1.1.2 Symbols 1.1.3 Equipment supplied 1.2 General warnings 1.3 Fundamental safety rules 1.4 More about the bi2+ 1.5 Dimensions and clearance 1.6 Nominal technical characteristics 2. INSTALLATION 2.1 Positioning the unit 2.2 Installation modes 2.3 Side opening 2.4 Vertical installation (wall or on the floor) -
Page 4: General
1.1 General information Thank you for having chosen a CIAT Divio comfort unit for the heating and cooling of your rooms. Please read this installation manual carefully before installing and switching on the unit. Following the indications contained in this manual will ensure that the appliance continues to operate perfectly over time. -
Page 5: Fundamental Safety Rules
• Repairs or maintenance operations should be carried out by qualified personnel in accordance with the current manual. Do not modify or intervene on the appliance as this could create dangerous situations and the manufacturer will not be responsible for any damage caused. - Page 6 1.4 Discover Divio, reversible comfort unit Divio fig. 1 A - Supporting structure in high resistance electrogalvanised steel sheet. B - Cold water heat exchange battery in copper pipes and aluminium fins with high efficiency turbulence. 3/4 eurokonus type threaded connections, + 3/4” GM flat adaptors (J) C - Ventilating unit consisting of a tangential fan with unphased blades in synthetic material (extremely quiet) mounted on anti- vibration supports in EPDM, balanced statically and dynamically, and splined directly onto the motor shaft.
-
Page 7: Dimensions And Clearance
1.5 Overall dimensions and clearance DIVIO Fig. 2 - Dimensions (in mm) Feet optional Fig. 3 - Minimum distances for assembly (in mm) 20 mm 20 mm 400 mm Nominal technical characteristics Fig. 3 DIVIO Water capacity of the coil... -
Page 8: Installation
Failure to respect the rules indicated will not only can cause the appliance to malfunction but will also void the warranty and hence CIAT shall not be responsible for any damage to persons, animals or property. -
Page 9: Vertical Installation (Wall Or On The Floor)
2.4 Vertical installation: wall or floor mounted For floor mounting with feet, consult the instruction sheets and manual provided. Using the paper template, trace the position of the two fixing brackets on the wall (fig. 6). Use a suitable drill to make the holes with and insert the toggle bolts (2 for each bracket) (fig. -
Page 10: Hydraulic Connections
2.5 Hydraulic connections 2.5.1 Pipeline diameter The minimum internal diameter that must be respected for the pipelines of the hydraulic connections varies according to the model: Divio 700 Ø12 mm Divio 900 Ø14 mm 2.5.2 Connections The choice and sizing of the hydraulic lines must be made by an expert who must operate according to the rules of good practice and the laws in force. -
Page 11: Rotation For Tubes On The Right
2.7 Rotation for tubes on the right The operations described and the relative images refer to a machine with fixtures on the left on which the fixtures on the right side must be rotated. If there is a machine available with right side fixtures that require rotation to the left, the sequence of the operations is the same, only the images are a mirror image. -
Page 12: Dismounting Exchangers
2.7.2 Dismounting exchangers - Unscrew the two side screws (fig. 14 ref. A) that fasten the front deflector (fig. 14 ref. B). - Loosen the four screws that fix the exchanger (fig. 14 ref. C); - remove the coil water probe; - remove the exchanger (fig. -
Page 13: Evacuating Air While Filling The System
2.8 Evacuating air while filling the system - Open all the system interception devices (manual or automatic); - Start the filling by slowly opening the system water filling tap; - Use a screwdriver on the coil bleeder located above (fig. 17 réf. A) . Fig. -
Page 14: Maintenance
2.9 Maintenance Regular maintenance is essential to keep the Divio unit operating correctly and safely for as long as possible. Biannual, or for some maintenance operations annual, interventions can be carried out by a technically qualified professional; in addition, original spare parts may be provided. -
Page 15: Cleaning Filtering Seats
2.11.2 Cleaning filtering seats - suck up the powder with a vacuum cleaner (fig. 20 ref. A) - wash the filter (fig. 20 ref. B) with running water without using detergents or solvents, and leave to dry. - Reassemble the filter (fig.21 ref. A) taking care to insert the lower side (fig. 21 ref. B) into its groove. Fig. -
Page 16: Troubleshooting
3. TROUBLESHOOTING Should leaks occur or in the case of abnormal operation, immediately cut off the electrical supply and shut off the water inlet. If you notice any of the following faults, contact a qualified technican and do not intervene yourself. - The ventilation is not activated even if there is hot or cold water in the hydraulic circuit. - Page 18 CIAT Service Habitat Tel. : 0 826 96 31 05 (0,15€ TTC/min) Non-contractual document. As part of its policy of continual product improvement, CIAT reserves the right to make any technical modifications it feels appropriate without prior notification. EN - 16...
Need help?
Do you have a question about the Divio and is the answer not in the manual?
Questions and answers