Repeat And Shuffle; Playing A Cd - Boston Acoustics Shelf Stereo System Owner's Manual

CD Player
8
Loading a CD
Open the flip-down door. Insert a disc, label side up, into the slot. The CD player will
automatically draw the disc in and play it.
If the red light next to the Eject button is blinking, there is already a disc in the CD
player. DO NOT INSERT A DISC IF THE RED LIGHT IS BLINKING. Press the
Eject button and the red light will go out after the disc is ejected. When there is no disc
in the CD player, "disc?" will appear in the display.
Warning: Adhesive CD labels may loosen, damaging this or any other CD player. A permanent marker can be used to label the disc.
Note: If a CD fails to eject, press and hold the Eject button for 3 seconds.
1

Playing a CD

Repeat and Shuffle

Press the Play/Pause button. Press this button again to
pause a disc: The arrow next to "CD" in the display will blink.
Tune / Track
Pressing Play/Pause again will resume playback.
To skip to the next or previous track, press the Tune/Track
arrow buttons. You can advance forward or backward within a
track by holding down the Tune/Track arrow button.
The display will indicate whether "Repeat" or "Shuffle" is activated.
Press the Repeat/Shuffle button once on the MicroSystem
CD to repeat a CD continuously. Press the Repeat/Shuffle
button a second time to play the songs in a random order. Press the
Repeat/Shuffle button a third time to activate both Repeat and
Shuffle at the same time. This setting will repeat the shuffle play
order continuously. To return to normal playback, press the
Repeat/Shuffle button until "Repeat" and "Shuffle" disappear
from the display window.
2
Eject