Using The Sleep Function; More Features; Changing The Display Information - Boston Acoustics Shelf Stereo System Owner's Manual

Alarms (continued)
12

Using the Sleep function

More Features

Changing the display information

When listening to the MicroSystem CD, this function turns
off the MicroSystem CD automatically after a predetermined
"sleep" time.
When the MicroSystem CD is playing normally (no alarm is
sounding), hold down the Snooze/Sleep button on the
MicroSystem CD or the Sleep button on the Remote
Control for 2 seconds. The "Sleep" indicator is shown in
the display, and the initial sleep time of 60 minutes is shown
temporarily.
Each additional press of the Snooze/Sleep or Sleep button
will shorten the sleep time in 10-minute increments to the
nearest 10 minutes.
While the MicroSystem CD is in the sleep setting, press the
Snooze/Sleep or Sleep button once. The remaining sleep
time will be temporarily shown in the display, then the dis-
play will revert to its normal readout (either the current clock
time or radio frequency, depending on which has been selected).
You can tailor the display to show your preferred information, such
as whether to show clock time or station frequency while playing the
radio; or to show clock time, CD track number, or CD track time
when playing a disc. Press the Info button repeatedly to pick your
preferred display. Each music source can remember its own preferred
display setting. To check for information that is not currently
displayed, use the Info button to show the information, and then use
it again to return to your previous preferred display.