Advertisement
Table of Contents
Load chart:
Using the table:
1. Position the table as needed.
2. Apply both caster brakes.
3. Determine the net weight that will be applied to
the table.
4. Use the load chart above to determine how many
springs to use.
5. Remove the top cover by unscrewing the socket
head bolts.
6. Unhook the springs that will not be used.
Disconnect springs from the lower hanger bar, but
leave them connected to the upper hanger bar.
7. Replace the cover and reinstall the bolts.
8. Carefully apply the load to the table.
Socket head bolt
Load deck
Mast track
Front cover
Table of Contents
Socket
Top cover
head bolt
Mast
Copyright 2017 Vestil Manufacturing Corp.
Rev. 10/9/2018
(Shown without top cover, front cover, and load deck for clarity)
Upper hanger bar
Lower hanger bar
ETS MANUAL
Caster brake
lever: press
down on
brake lever
to engage
the brake.
Lift the lever
to release
the brake
Page 5 of 7
Advertisement
