Download Print this page

Specifications; Signal Words - Vestil ETS Series Instruction Manual

Self-adjusting work tables

Advertisement

Table of Contents
:

Specifications

Dimensions, capacity, and net weight information appear in the table and diagrams.

Signal Words:

This manual uses SIGNAL WORDS to indicate the likelihood that a particular action will cause personal injuries
or property damage. Signal words also specify the level of seriousness of injury if the product is misused in the
ways described. The following signal words are used in this manual.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS
INJURY. Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS
INJURY.
Identifies practices likely to result in product/property damage, such as operation that might
damage the product.
Identifies practices likely to result in product/property damage, such as operation that might
damage the ladder.
Hazards of Improper Use:
Vestil strives to identify all hazards associated with the use of our products. However, material handling is dangerous
and no manual can address every risk. The most effective means for preventing accidents is for the end-user to
exercise common sense and sound judgment whenever using this product.
Improper or careless use might result in serious personal injuries.
• Do not remove, alter, or obscure any label. If a label is damaged or unreadable, replace it. DO NOT use the lifter
until all replacement labels are applied.
• Do not exceed the capacity of your table! Each table is labeled with its capacity. See Label 287 in
Diagram
on p. 6).
• The table should never be used with fewer than 4 springs.
• Center and evenly distribute loads applied to the table.
• Apply both caster brakes whenever the table is stationary and particularly whenever loads are applied.
• Do not move the table across sloped terrain while it is loaded.
• ALWAYS remain uphill of the (unloaded) table whenever moving up or down inclines. If you cannot easily handle
the table, do not attempt to move it by yourself.
• Keep your hands away from pinch points and openings. Do not reach beneath the table while it is loaded.
Table of Contents
Rev. 10/9/2018
Copyright 2017 Vestil Manufacturing Corp.
ETS MANUAL
Model
Capacity
Net weight
230 lb.
ETS-230
104.5 kg
460 lb.
ETS-460
209.1 kg
Labeling
Page 2 of 7
118 lb.
53.6 kg
119 lb.
54.1 kg

Advertisement

loading

This manual is also suitable for:

Ets-230Ets-460