Table of Contents
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description of
it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Assistance:
For answers to questions not addressed in these instructions and to order replacement parts,
labels, and accessories, call our Technical Service and Parts Department at (260) 665-7586. The
department can also be contacted online at http://www.vestilmfg.com/parts_info.htm.
Specifications..............................................................................................................................
Signal Words................................................................................................................................
Hazards of Improper Use.........................................................................................................
ETS-230 Exploded View and Bill of Materials....................................................................................
ETS-460 Exploded View and Bill of Materials....................................................................................
Load Chart...................................................................................................................................
Using the Table...........................................................................................................................
Record of Normal Condition..........................................................................................................
Inspections & Maintenance............................................................................................................
Labeling Diagram........................................................................................................................
Limited Warranty............................................................................................................................
Table of Contents
ETS-Series Self-Adjusting Work Tables
Instruction Manual
Table of Contents
Copyright 2017 Vestil Manufacturing Corp.
Rev. 10/9/2018
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
Web:
www.vestilmfg.com
ETS MANUAL
e-mail:
info@vestil.com
HU
Page 1 of 7
U
2
2
2 – 3
...
3
4
5
5
6
6
6
7