Acura ZDX 2013 Online Reference Owner's Manual page 90

Main Menu
■
Trip Meter
Shows the total number of miles (U.S.) or kilometers (Canada) driven since the last
reset. Meters A and B can be used to measure two separate trips.
■
Resetting a trip meter
To reset a trip meter, display it, then press and hold the SEL/RESET button. The trip
meter is reset to 0.0.
■
Outside Temperature
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
■
Adjusting the outside temperature display
Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading
seems incorrect.
■
Engine Oil Life
Shows the remaining oil life and Maintenance Minder
2 Maintenance Minder
TM P. 231
■
Average Fuel Economy
Shows the estimated average fuel economy of each trip meter in mpg (U.S.) or l/100 km
(Canada). The display is updated at set intervals. When a trip meter is reset, the average
fuel economy is also reset.
Table of contents
uuGauges and Multi-Information DisplayuMulti-Information Display
TM .
Continued
1Trip Meter
Switch between trip meter A and trip meter B by
pressing the SEL/RESET button.
Use the multi-information display's customized
features to correct the trip meter.
2 Multi-Information Display P. 87
1Outside Temperature
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
Use the multi-information display's customized
features to correct the temperature.
2 Customized Features P. 92
1Average Fuel Economy
You can change when to reset the average fuel
economy.
2 Customized Features P. 92
89