Acura ZDX 2013 Online Reference Owner's Manual page 68

Main Menu
Indicator Name
Comes on when you set the power
●
mode to ON, and goes off either
when the engine starts or after
several seconds if the engine is not
started. If "readiness codes" have
not been set, it blinks five times
Malfunction
before it goes off.
Indicator Lamp
Comes on if there is a problem
●
with the emissions control system.
Blinks when a misfire in the
●
engine's cylinders is detected.
Comes on when you set the power
●
mode to ON, and goes off when
Charging System
the engine starts.
Indicator
Comes on when the battery is not
●
charging.
Table of contents
On/Blinking
Readiness codes are part of the on board
●
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 310
Comes on while driving - Have the
●
vehicle checked by a dealer.
Blinks while driving - Stop in a safe
●
place where there are no flammable
objects. Stop the engine for 10 minutes
or more, and wait for it to cool down.
Then, take the vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Stays on while driving - Turn off the
●
climate control system and rear defogger
in order to reduce electricity
consumption.
2 If the Charging System Indicator
Explanation
Comes On or Blinks P. 293
Comes On P. 292
uuIndicatorsu
Message
67
Continued