How To Use - GeekChef GBI-F30A User Manual

TOUCH CONTROLS
After you have connected the appliance to the mains supply the backlight will turn on. It will turn

off after 5s without any operation and the hood will enter stand-by mode.
Press one of the speed buttons

Press the button

Press the button

Press the button

Press the button

off.
While the range hood is in use, if you press the timer button

for 5 minutes and then enter stand-by mode.
LED LIGHTS
Always switch off the electricity supply before carrying out any operations on the appliance.
To change the light:
Open the filter and find the spring of the light, push the spring and the light will be slip out. Change
the light as with same kind of 4 Volt, 2.5 Watt LED light.
Caution:
Light may be hot, please rotate when the light is cool.
10
for low speed. Push the button again and the motor will stop.
for medium speed. Push the button again and the motor will stop.
for high speed. Push the button again and the motor will stop.
and the lights will come on. Push the button again and lights will turn
to turn the appliance on.
once, the range hood will run