Panasonic KX-FLB802CX Service Manual page 78

KX-FLB802CX/KX-FLB812CX/KX-FLB802CXS/KX-FLB812CXS
8.1.4.2. Using the mamual input tray
You can print not only on plain paper but also on special media (transparencies / labels / envelopes).
The manual input tray is used only for printing with the computer and can hold 1 sheet per time. If multiple pages are needed to
be printed, add a next page after the first page is fed into the unit.
• Please refer to page 91 in Operating Instructions.
Load the recording paper after you start printing with the computer.
1. Pull open the manual input tray (1) to the front, then raise the extender
(2) gently until it clicks into place.
2. Insert the paper, print-side down (1) until the unit grasps the paper and
a single beep is heard.
• Adjust the width of the guides (2) to the size of the recording paper.
Note:
• If the paper is not inserted correctly, re-adjust the paper, or the
paper may jam.
• Make sure the unit grasps the recording paper in step 2. The dis-
play shows the following.
78