Panasonic KX-FLB802CX Service Manual page 145

All in one flatbed laser fax
Table of Contents

Advertisement

12.3.9.7. AN ABNORMAL IMAGE IS COPIED
CROSS REFERENCE:
CIS CONTROL SECTION (P.175)
12.3.10. COMMUNICATION SECTION
Find the problem in the table shown below, and refer to the corresponding troubleshooting procedure in DEFECTIVE FACSIM-
ILE SECTION (P.146).
No.
1
The paper dose not feed properly when faxing.
(Copying is also not possible.)
2
The fax transmits successfully one time and fails another.
(Copying is also possible.)
3
The fax receives successfully one time and fails another.
(Copying is also possible.)
4
The fax completely fails to transmit or receive.
(Copying is also possible.)
5
The fax fails either to transmit or receive when making a
long distance or an international call.
(Copying is also possible.)
6
The fax image is poor when transmitting or receiving during
a long distance or international call.
7
No.1-No.5
Symptom
KX-FLB802CX/KX-FLB812CX/KX-FLB802CXS/KX-FLB812CXS
Content
Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
Detailed description of the
possible causes (Similar to
troubleshooting items No.2
and No.3.)
The troubleshooting proce-
dure for each error code will
be printed on the communi-
cation result report.
145
Possible cause
Problem with the feeding mecha-
nism.
(Refer to TRANSMIT PROBLEM
(P.146)
Problem with the service line or with
the receiver's fax.
(Refer to SOMETIME THERE IS A
TRANSMIT PROBLEM (P.147)
Problem with the service line or with
the transmitter's fax.
(Refer
to
RECEIVE
PROBLEM
(P.148)
Problem with the electric circuit.
(Refer to THE UNIT CAN COPY,
BUT
CANNOT
TRANSMIT/
RECEIVE (P.149)
Problem with the service line.
(Refer to HOW TO OUTPUT THE
JOURNAL REPORT (P.155)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-flb812cxKx-flb802cxsKx-flb812cxs

Table of Contents