Chair Assembly (Continued)
3
Turning the chair upright
Turn the chair upright. Repeat procedure for other chair.
■
Your chairs are now ready for use.
Bistro Table Assembly
NOTE: Do not completely tighten bolts until indicated
in assembly step.
4
Attaching the table leg to the table rim
Remove all
1/4 * 5/8 in.
bolts (AA) and
■
the table rim (C). Attach the table leg (D) to the table rim (C) using
two
1/4 * 5/8 in.
bolts (AA) through two
the table leg (D) and table rim (C). Repeat procedure for the other
three legs.
D
C
1/4 in. metal washers
(DD) from
1/4 in. metal washers
(DD) into
AA
DD
5
Attaching the metal center ring to the
table legs
Remove all
1/4 * 5/8 in.
■
the table legs (D). Attach the metal center ring (E) to the table legs (D)
using two
1/4 * 5/8 in.
bolts (AA)
into the metal center ring (E) and table leg (D). Repeat procedure for
the other three legs.
D
5
Please contact 1-855-HD-HAMPTON for further assistance.
bolts (AA) and
1/4 in. metal washers
through two
1/4 in. metal washers
DD
AA
E
HOMEDEPOT.CA
(DD)
from
(DD)