Download Print this page

Cupboard; Dry Only; Functions; To Enable A Function - Indesit IWDE126 Operating Instructions Manual

Advertisement

Cupboard - very dry clothes recommended for towelling and bathrobes
A cooling stage is foreseen at the end of the drying cycle.
If your laundry load to wash and dry is exceptionally in excess of the maximum load foreseen (see table
opposite) perform the wash cycle and when the programme is complete divide up the garments and
put part of them back in the drum. Now follow the instructions provided for a dry only cycle.
Repeat this procedure for the remainder of the load

Dry Only

Turn the PROGRAMME knob to one of the drying settings (7–8) depending on the type of fabric then select the
desired drying type using the DRYING knob.
Important: A spin cycle is carried out during the drying if you have set a cotton programme and a level of
dryness.
For cotton loads of less than 1 Kg, use the drying programme designed for delicate fabrics.

Functions

To enable a function:

1. Press the button corresponding to the desired function according to the table below;
2. The function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
www.sacoapartments.com

Advertisement

loading