Safety – Operation – Maintenance
Keep this document in a safe place
Read and understand this manual before operating your equipment
Barracuda Electric
Immersion Separator 120V / 220V with Pneumatic Tool Sync
Models with Prefix: CMP-315C
Designed for the Collection of Combustible Dust
For use in Class I: Group D & Class II: Groups E, F, & G
Designed for use in ATEX Zones 1 & 2, 21 & 22
Scan this QR code for
online instructions and
documentation, or visit
www.ClaytonHowTo.com
WARNING
SAFETY LEGEND
Read and understand operator's manual before
using this equipment.
Hearing protection is required when applicable
PEL (permissible exposure limit) is exceeded.
WARNING
Some dust created by sanding, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement and other masonry products
• Chromium and other heavy metals from paint and primers
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING
WARNING
WARNING
Eye protection is required when operating
this equipment.
WARNING
Respiratory protection is required when
applicable PEL (permissible exposure limit)
is exceeded.
April 2020