Table of Contents
Advertisement
Quick Links
DALCNET S.r.l.
Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy
Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy
Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453
VAT: IT-04023100235
info@dalcnet.com www.dalcnet.com
➔
For the whole and updated Device Manual refer to producer's website:
Variants
CODE
Supply
Voltage
DGM01-1248
12/24/48V DC
DGM01-1248-NDS
12/24/48V DC
Technical Specifications
Supply Voltage
Input Current
Storage temperature
Ambient temperature
Protection Grade
Weigth
Mechanical dimensions
Packaging dimensions
ETHERNET
MODBUS RTU
DMX
DALI
Server Gateway
DGM01
Gateway ETHERNET-MODBUS-DMX512A-DALI
Function manual
FEATURES
• Power Supply
• Bus ETHERNET
• Bus Modbus
• Bus DMX 512
• Bus DALI
BUS1
Modbus RTU RS485 /
DMX512
Modbus RTU RS485 /
DMX512
voltage
@ 12Vdc
@ 24Vdc
@ 48Vdc
ALUMINIUM BOX: 105x70x47
– SERVER GATEWAY – FW 3.0
12/24/48 Vdc
10/100 Mbit
RTU, from 9600 to 250K baud
512 slots NSC, SIP, RDM
64 channels, buit in
125mA power supply
BUS2
Modbus RTU RS485 / DMX512
Modbus RTU RS485 / DMX512
min: 10.8 Vdc .. max: 52.8 Vdc
min
110mA (1,2W)
60mA (1,44W)
40mA (1,92W)
*ethernet and all bus at full load
min: -40 max: +60 °C
min: -10 max: +40 °C
ALUMINIUM BOX: IP20 - PLASTIC BOX IP10
ALUMINIUM BOX: 230g - PLASTIC BOX 125g
PLASTIC BOX: 72x92x62 mm DIN RAIL 4mod.
-
85 x 124 x 71 mm
10/100 Mbit baseT FULL DUPLEX AUTO NEGOTIATION
RS-485, from 9600 to 250kbaud
Max 512 channels (it depends on the wiring)
open fail safe - short fail safe
Max 64 channels, buit-in 125mA power supply
Made in Italy
http://www.dalcnet.com
BUS3
DALI with supply
DALI without supply
External DALI supply required
typ*
max
320mA (3,84W)
500mA
160mA (3,84W)
80mA (3,84W)
CONTROLLERS
Rev. 2016-09-19
pag. 1/22
Advertisement
Table of Contents
Related Manuals for DALCNET DGM01
Summary of Contents for DALCNET DGM01
- Page 1 DALCNET S.r.l. DGM01 – SERVER GATEWAY – FW 3.0 Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy Made in Italy Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy Gateway ETHERNET-MODBUS-DMX512A-DALI Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453 Rev.
-
Page 2: Reference Standards
DALCNET S.r.l. DGM01 – SERVER GATEWAY – FW 3.0 Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy Made in Italy Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy Gateway ETHERNET-MODBUS-DMX512A-DALI Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453 Rev. -
Page 3: Installation
DALCNET S.r.l. DGM01 – SERVER GATEWAY – FW 3.0 Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy Made in Italy Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy Gateway ETHERNET-MODBUS-DMX512A-DALI Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453 Rev. -
Page 4: Local Input
DALCNET S.r.l. DGM01 – SERVER GATEWAY – FW 3.0 Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy Made in Italy Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy Gateway ETHERNET-MODBUS-DMX512A-DALI Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453 Rev. - Page 5 APPLICATION DGM01 device acquires information coming from one or more bus (configured on reception mode) and from Ethernet network; it transmits the information to the buses (configured on transmission mode) and on Ethernet network, converting information between multiple protocols in real time.
- Page 6 Function manual pag. 6/22 info@dalcnet.com www.dalcnet.com sACN (ETHERNET) DGM01 implements ArtNet protocol and can be used as sACN → DMX and ArtNet → DALI gateway from main softwares and lighting desk. The port UPD 5568 is used. Configuration Art-Net 3 (ETHERNET) DGM01 implements Art-Net 3 protocol and can be used as Art-Net →...
- Page 7 (ETHERNET) DGM01 allows to receive and/or transmit a DMX512A+RDM universe from/to other DGM01 or other devices through UPD protocol. Just need to send a packet of 512 bytes on the configured UDP port (default: 1025) for the communication of 512 levels of light intensity.
-
Page 8: Modbus Tcp/Ip
MODBUS TCP/IP (ETHERNET) DGM01 has a MODBUS TCP/IP server available which is able to receive and/or transmit a DMX512A+RDM universe towards one or more Modbus devices on Ethernet network. 512 registers are available, with Modbus address from 0 to 511 and value from 0 to 255. - Page 9 TCP Telnet (ETHERNET) DGM01 provides a Telnet server which is able to receive and/or transmit a DMX512A+RDM universe from/to other devices by TCP protocol. The communication takes place establishing a connection on TCP 23 port (Telnet). It is possible to send the state of the 512 brightness levels (or even a lower number) on a single ASCII string.
- Page 10 DALCNET S.r.l. DGM01 – SERVER GATEWAY – FW 3.0 Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy Made in Italy Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy Gateway ETHERNET-MODBUS-DMX512A-DALI Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453 Rev.
- Page 11 HTTP binary transfer (ETHERNET) DGM01 provides an HTTP server which is able to receive and/or transmit a DMX512A+RDM universe from/to other devices by HTTP protocol. The communication takes place establishing a connection on the TCP 80 port (Web Server).
- Page 12 (ETHERNET) DEPRECATED - please don't use for new applications DGM01 provides an HTTP server which is able to receive and/or transmit a DMX512A+RDM universe from/to other devices by HTTP protocol. The communication takes place establishing a connection on the TCP 80 port (Web Server).
-
Page 13: Web Server
WEB SERVER (ETHERNET) DGM01 provides a WebApp for supervision and setting of all available channels, which can be used from every modern device with an HTML5 capable browser. A window with 6 visible channels is displayed. All the other channels can be scrolled to be visualized. -
Page 14: Device Info
→ BUS Manager : Control and Management of devices connected to BUS network (provided for DALI BUS) → Device Config: Configuration Menu of the DGM01. In this section is possible to configure IP address, network protocol settings and BUS settings. CONTROLLERS... - Page 15 DALCNET S.r.l. DGM01 – SERVER GATEWAY – FW 3.0 Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy Made in Italy Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy Gateway ETHERNET-MODBUS-DMX512A-DALI Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453 Rev.
- Page 16 DALCNET S.r.l. DGM01 – SERVER GATEWAY – FW 3.0 Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy Made in Italy Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy Gateway ETHERNET-MODBUS-DMX512A-DALI Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453 Rev.
-
Page 17: Reset Parameters
DALCNET S.r.l. DGM01 – SERVER GATEWAY – FW 3.0 Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy Made in Italy Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy Gateway ETHERNET-MODBUS-DMX512A-DALI Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453 Rev. -
Page 18: Device Config
To activate and store desired settings, it is necessary to click on “Save and Reboot” button and wait for DGM01 restart. To exit the Device Config page it is necessary to click on Dalcnet logo on the top left side of the interface’s display. - Page 19 DALCNET S.r.l. DGM01 – SERVER GATEWAY – FW 3.0 Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy Made in Italy Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy Gateway ETHERNET-MODBUS-DMX512A-DALI Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453 Rev.
- Page 20 20/22 info@dalcnet.com www.dalcnet.com BUS 1 (or BUS 1&2) - MODBUS RTU MASTER DGM01 provides two buses (BUS1 and BUS2) that can be configured as MODBUS RTU MASTER on RS-485 standard. Configuration Baud rate values can be selected from the following:...
- Page 21 21/22 info@dalcnet.com www.dalcnet.com BUS 2 (oppure BUS 1&2) - DMX512 CONTROLLER DGM01 provides two buses (BUS1 and BUS2) that can be configured as DMX512+RDM CONTROLLER (MASTER). Simply select the MASTER option from the drop-down menu in order to be able to transmit the entire DMX universe.
- Page 22 DALI controller; in other words, one or more virtual DALI devices are present inside DGM01. From an electrical point of view, the load is corresponding to that of a single device, so DGM01 is able to work with other DALI devices on the same network. Configuration It is possible to choose the number of used channels, from 1 to 64.