Advertisement
5. FX Setup
(1) Connect FX/FX-DUO to the USB port of SX-2000WG+ .
Device Connection to SX-2000WG+
If FX/FX-DUO is connected to SX-2000WG+, please do not use a USB hub. Connecting
multiple USB devices is not supported if FX/FX-DUO is connected.
(2) Run "Start"→"All Programs"→"SX Virtual Link"→"SX Virtual Link".
(3) Select "Option".
(4) Click on "Search for device servers" and input "192.168.0.255" and select "Register" as
shown below and select "OK".
Broadcast Address to be used
If you did not use the default parameters for SX-2000WG+, please use the relevant
broadcast address. If you are not sure, please ask the network administrator.
All Rights Reserved. Copyright © 2008, Hitachi Software Engineering Co., Ltd.
FX
FX-DUO
18
Advertisement
