General Norms - Fast RHE Series Selection, Use, Installation And Maintenance Manual

Heat recovery units with cooling circuit
Table of Contents

Advertisement

The present manual is an integral part
of the documentation enclosed with the
machine.
It must be conserved for future reference
and must accompany the machine throu-
ghout its working life.
The manual defines the purpose to which
the machine was built and establishes the
correct installation and use limits.
• All use, installation and maintenance
instructions of the unit are described
in this manual as well as the main
accident prevention standards.
• Read carefully and fully all informa-
tion contained in this manual before
the installation, starting, use, main-
tenance and cleaning of the unit.
Pay particular attention to the use
regulations that are accompanied by
"DANGER" or "WARNING", because if
not observed, they could cause dama-
ge to the machine and/or persons and
property.
For irregularities not contemplated
by this manual, please consult the
local After Sales Service.
• FAST S.p.A. decline any responsibility
for any damage due to the improper
use of the machine, and to a partial or
superficial reading of the information
contained in this manual.
Installation and maintenance must be
carried out by trained and qualified
personnel, having the requirements
laid down by law 46/90 and/or DPR
380/2001 for electric/electronic and
air conditioning installations, with
consequent registration at the local
CHAMBER of COMMERCE. Otherwise
FAST S.p.A. decline all responsibility
regarding the safety of the product.
THE MANUFACTURER DECLINES ANY
R E S P O N S I B I L I T Y F O R D A M A G E TO
P R O P E RT Y, P E R S O N S O R A N I M A L S
CAUSED BY THE NON OBSERVANCE OF
THE INDICATIONS AND REGULATIONS
CONTAINED IN THE PRESENT MANUAL.
Selection, installation, use and maintenance manual
High effi ciency heat recovery unit with cooling circuit - RHE -

General norms

Even though a suitable risk analysis was
carried out during the design of the HRR
unit, pay ATTENTION to the pictograms on
the machine that make the reading of the
manual easier catching the readers atten-
tion concerning risks that can't be avoided
or sufficiently limited with the adoption
of protection means and measures.
GENERAL DANGER SIGNS
Carefully observe all indications
at the side of the pictogram.
The non observance of the indications
could cause hazardous conditions with
possible injury to the operator and to the
user in general.
VOLTAGE DANGER SIGN
Carefully observe all indications
at the side of the pictogram.
The signs indicate components on the unit
or, in the present manual, identify areas
that could generat risks of an electrical
nature.
GENERAL WARNING SIGNS
Carefully observe all indications
to the side of the pictogram that
limit some actions in order to ensure grea-
ter safety for the operator.
MAIN GUARANTEE
CONDITIONS
• The guarantee does not includ pay-
ment for damages due to incorrect
installation by the installer.
• The guarantee does not include pay-
ment for damages due to the improper
use of the unit by the user.
• The manufacture is not responsible for
injuries to the installer or user, caused
by incorrect installation or improper
use of the unit;
The equipment must be installed in
such a manner so as to allow mainte-
nance and/or repair operations;
• The guarantee does not cover in any
case costs due to turntable ladders,
scaffolding or othe similar elevating
systems that are necessary to carry
out operations under guarantee.
4
The guarantee is not valid if:
• the services and repairs have been
carried out by unauthorised personnel
or companies;
• the unit has been previously repaired
or modified with non original parts;
• the unit has not been suitably maintai-
ned;
• the instructions illustrated in the pre-
sent manual have not been observed;
• unauthorised modifications have
been made.
Note:
The manufacturer reserves the right to
carry out modifications at any time dee-
med necessary to improve their product,
and are not obliged to apply the said
modifications to previously manufactured
machines that have already been delive-
red or are being constructed.
The general conditions are in any case
subject to the general sale conditions
included on the stipulation of the con-
tract.
GB

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rhe 15Rhe 25Rhe 33

Table of Contents