GMC Chevrolet Silverado 2500HD 2021 Owner's Manual page 49

48 Seats and Restraints
Save preferred memory feature positions to
both 1 and 2 if you are the only driver.
Manually Recalling Memory Positions
Press and hold 1, 2, or to recall the
previously saved memory positions if you
are driver 1 or 2 identified in the DIC
welcome message.
To stop Manual Memory recall movement,
release 1, 2, or or press any of the
following controls:
Power seat
Memory SET
Power mirror, with the driver or
passenger side mirror selected
Manual Memory recall movement for 1, 2,
or buttons may be initiated and may
complete to the saved memory position if
the vehicle is in or out of P (Park).
Seat Entry Memory
The vehicle identifies the number of the
current driver s RKE transmitter (1 8). See
Remote Keyless Entry (RKE) System
Operation (Key Access) 0 10 or
Remote Keyless Entry (RKE) System
Operation (Keyless Access) 0 13. If the RKE
transmitter is 1 or 2, and Seat Entry Memory
is enabled in vehicle personalization, the
positions saved to the same memory button
number 1 or 2 are automatically recalled
when the vehicle is turned on, or turned
from off to ACC/ACCESSORY. RKE
transmitters 3 8 will not provide automatic
memory recalls.
To turn Seat Entry Memory on or off, see
Vehicle Personalization Settings previously
in this section and Vehicle Personalization
0 126.
The shift lever must be in P (Park) to start
Seat Entry Memory. Seat Entry Memory
recall will complete if the vehicle is shifted
out of P (Park) prior to reaching the saved
memory position.
To stop Seat Entry Memory recall
movement, turn the vehicle off or press any
of the following controls:
Power seat
Memory SET, 1, 2, or
Power mirror, with the driver or
passenger side mirror selected
If the saved memory seat position does not
automatically recall or recalls to the wrong
positions, the driver s RKE transmitter
number (1 or 2) may not match the memory
button number that positions were saved to.
Try storing the position to the other
memory button or try the other RKE
transmitter.
Seat Exit Memory
Seat Exit Memory is not linked to an RKE
transmitter. The position saved to
used for all drivers. To turn Seat Exit
Memory on or off, see "Vehicle
Personalization Settings" previously in this
section and Vehicle Personalization 0 126.
If turned on, the position saved to
automatically recalled when one of the
following occurs:
The vehicle is turned off and the driver
door is opened within a short time.
The vehicle is turned off with the driver
door open.
To stop Seat Exit Memory movement, press
any of the following memory controls:
Power seat
Memory SET, 1, 2, or
Power mirror, with the driver or
passenger side mirror selected
is
is