Advertisement
DIGITAL UNDERCOUNTER DISHWASHER
PRODUCTION YEAR :
MANUFACTURER : ÖZTİRYAKİLER MADENİ EŞYA SAN. VE TİC. A.Ş.
ADDRESS : Cumhuriyet Mah. Eski Hadımkoy Yolu No:8 Buyukcekmece Istanbul/TURKEY
Tel : 0090 212 886 78 00 (8 Hat-Lines) Fax : 0090 212 886 66 29
USER'S MANUAL
SERIAL NO :
MODEL :
OBY 40D P
OBY 40D PD
OBY 40D PT
OBY 40D
OBY 500D PR
OBY 500D PDR
OBY 500D PRT
OBY 500D
Advertisement
Related Manuals for OZTI OBY 40D P
Summary of Contents for OZTI OBY 40D P
- Page 1 DIGITAL UNDERCOUNTER DISHWASHER USER’S MANUAL MODEL : OBY 40D P OBY 40D PD OBY 40D PT OBY 40D OBY 500D PR OBY 500D PDR OBY 500D PRT OBY 500D PRODUCTION YEAR : SERIAL NO : MANUFACTURER : ÖZTİRYAKİLER MADENİ EŞYA SAN. VE TİC. A.Ş.
-
Page 2: Table Of Contents
TABLE OF CONTENTS TOPICS PAGE 1-INTRODUCTION 2-TECHNICAL DATA 3-WARNING SIGNS AND SAFETY DETAILS 4-TRANSPORTING AND MOVING 5-OPERATION OF THE MACHINE 6-CLEAN-UP AND MAINTENANCE 7-ELECTRICAL CIRCUIT DIAGRAM 8-TROUBLESHOOTING... -
Page 3: 1-Introduction
1-INTRODUCTION Dear User, Thank you for purchasing our device and for your reliance upon our company. Our devices have been used within our customers kitchen, your kitchen in 100 countries. Our devices are produced in compliance with international standards. Important notice: Please read or ensure that the users read this user’s manual in order to achieve the desired performance in line with your expectations and to use your device for long years. -
Page 4: 2-Technical Data
2- TECHNICAL DATA: MODEL OBY 40D P OBY 40D PD OBY 40D PT OBY 40D Code 074D.10000.AD 074D.11000.AD 074D.10010.AD 074D.11010.AD Total Rating 220-240V~NPE/50Hz 220-240V~NPE/50Hz 220-240V~NPE/50Hz 220-240V~NPE/50 Hz Total Rating(kW) Washing Capacity (Plate/Hour) Washing Capacity (Basket/Hour) 33/26/18 33/26/18 33/26/18 33/26/18 Washing/Boiler Tank 18.4/2.8 lt. - Page 5 MODEL OBY 500D PR OBY 500D PDR OBY 500D PRT OBY 500D Code 0710.00500.05 0710.00500.13 0710.00500.08 0710.00500.40 Total Rating 220-240 V ~ NPE / 50 220-240 V ~ NPE / 50 220-240 V ~ NPE / 50 220-240 V ~ NPE / 50 Total Rating(kW) Washing Capacity (Plate/Hour)
- Page 6 2.1 Device Dimensions: Max. Loading Height A : Fresh Water Inlet B : Electrical Connection C : Drain Hose Outlet...
-
Page 7: 3-Warning Signs And Safety Details
3- WARNING SIGNS AND SAFETY DETAILS 3.1 Warning Signs Power Network Grounding Electricity Attention Important Grounging The machine should never be exposed to direct sunlight. The machine should never be left in water and its outer surface should never be cleaned with high pressure water. -
Page 8: 4-Transporting And Moving
TRANSPORTING AND MOVING The machine should be placed vertically on a palette by manpower. Transportation should be carried out by inserting the forklift forks under the machine. If the transported distance is far, the machine should be moved slowly and fixed to the palette or supported by another personnel to prevent jolt, if necessary. - Page 9 4.2 Installation Diagram Min. 20 cm Max. 5 cm. 120 cm. 5 cm. Max.
- Page 10 All connections are made from the back of the product. A: Drain hose connection B: Fresh water inlet connection C: Electrical supply cable D: Detergent/Rinse-aid hose connections 4.3 Electrical Connections: All electrical connections must be made by authorized service personnel in accordance with local and national standards and directives.
- Page 11 4.6 Drain Connection: 4.6.1. Models Without a Drain Pump: In models without a drain pump, waste water is transferred to the drain vent by gravity. Drain hose should run to the drain vent with a downward slope. Therefore, drain vent height should be max. 100 mm. Never reduce the diameter of the drain hose.
- Page 12 4.8 Washing and Rinsing Water Temperatures Water temperatures can be adjusted. During production, our appliance is set to the following temperature values. The temperature should not be set higher than these temperatures. OBY 40D & 500 D Models: Rinsing Water Temp.(Boiler) 85°C Washing Water Temp.(Tank) 55°C...
-
Page 13: 5-Operation Of The Machine
5- OPERATION OF THE MACHINE 5.1 Getting to know our device: To understand the information in the user manual correctly, the main parts of the machine should be known, please have the information by examining the picture below. Top Panel Control Panel Door Basket... - Page 14 To ensure that the user is using the machine correctly after installation, the following items should be shown to the user; It should be shown how to cut off the electricity and water supply in case of emergency. Turning on the machine ...
- Page 15 5.7 Starting a Wash Cycle Open the door, load the first basket and check that upper and lower arms turn freely. For selecting the program, press the ‘Washing Stop’ switch. After, use the “Program Selection Key” to select a program (52 sec, 102 sec, 132 sec, 152 sec or 192 sec) considering the dish type and dirt level, and press the “Washing Start”...
- Page 16 5.8.2 Models With a Drain Pump (Optional): In each operation, drain system is automatically activated when rinsing cycle is started. Once washing cycle is complete, open the door and remove the drain plug. Remove Drain pipe, Press the ‘Washing Stop’ switch for 3 sec. when the drain character occure on LCD screen, drainage operation will start automatically.
- Page 17 Attention: If draining is to be carried out immediately after the operation, discharge water from the boiler may be 85°C. Then, re-place and tighten the plug. Re-place the front panel and make sure that all cables and hoses are securely fastened to the device to avoid any risk.
-
Page 18: 6-Clean-Up And Maintenance
6- CLEAN-UP AND MAINTENANCE 6.1 Periodical Maintenance and Clean-up Daily maintenance should be carried out by people informed about the safety instructions as following, after disconnecting power supply and water connections. 6.1.1 Daily Maintenance: Daily maintenance should be carried by the user. In order to clean up the machine within the day following should be carried out periodically after the washing operation: 1. -
Page 19: 7-Electrical Circuit Diagram
7- ELECTRICAL CIRCUIT DIAGRAM... -
Page 20: 8-Troubleshooting
8- TROUBLESHOOTING Please check the following items before calling the call centre: 1. Equipment does not run partially or completely, check the electrical supply to the appliance. 2. Check mains water and electrical connection is in place and active. 3. Electrical supply to the appliance should be 230 V NPE~/50 Hz. 4. - Page 21 10. Appliance does not drain; Check and clean the filters. Check if drain hose and drain vent are not clogged. In appliances with a motorized drain unit, drain system should comply with section 4.6. 11. Water intake is slow; ...
- Page 22 NOTE:…………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ………………………………………………………………………………………...
- Page 23 NOTE:…………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ……………………………………………………………………………………… ………………………………………………………………………………………...
- Page 24 6262.00020.58 EN-US / 01.01.2018...
Need help?
Do you have a question about the OBY 40D P and is the answer not in the manual?
Questions and answers