Sony SRS-XB501G Reference Manual page 2

Notes on the License
This product contains software that Sony uses under a licensing agreement
with the owner of its copyright. We are obligated to announce the contents of
the agreement to customers under requirement by the owner of copyright for
the software.
Please access the following URL and read the contents of the license.
http://rd1.sony.net/help/speaker/sl/18xg/
Notice on GNU GPL/LGPL applied software
This product contains software that is subject to the following GNU General
Public License (hereinafter referred to as "GPL") or GNU Lesser General Public
License (hereinafter referred to as "LGPL"). These establish that customers
have the right to acquire, modify, and redistribute the source code of said
software in accordance with the terms of the GPL or LGPL supplied. The
source code for the above-listed software is available on the Web.
To download, please access the following URL then select the model name
"SRS-XB501G".
URL: http://oss.sony.net/Products/Linux/
Please note that Sony cannot answer or respond to any inquiries regarding
the content of the source code.
Disclaimer regarding services offered by third parties
Services offered by third parties may be changed, suspended, or terminated
without prior notice. Sony does not bear any responsibility in these sorts of
situations.
Specifications
Speaker section
Speaker system Satellite: Approx. 45 mm dia. × 2
Subwoofer: Approx. 125 mm dia. × 1
Enclosure type Satellite: Closed type
Subwoofer: Closed type
Network
Compatible standards
IEEE802.11 a/b/g/n
Radio frequency 2.4/5 GHz band
BLUETOOTH
Communication System
BLUETOOTH Specification version 4.2
Output BLUETOOTH Specification Power Class 1
Maximum communication range
Line of sight approx. 30 m* 1
Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method
FHSS
Compatible BLUETOOTH Profiles* 2
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
Supported Codec* 3 SBC* 4 , AAC* 5
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
1
* The actual range will vary depending on factors such as obstacles between devices,
magnetic fields around a microwave oven, static electricity, reception sensitivity,
antenna's performance, operating system, software application, etc.
* 2 BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication
between devices.
* 3 Codec: Audio signal compression and conversion format
* 4 Subband Codec
5
* Advanced Audio Coding
Microphone
Type MEMS (Micro Electronics Mechanical System) Type
Directional characteristic
Omni directional
Effective frequency range
100 Hz - 8,000 Hz
Number of microphones
Mic × 2
General
DC OUT USB jack (for charging the battery of a connected device) (5 V,
Max.1.5 A)
Power DC 12 V (using the supplied AC adaptor connected to AC 100 V
- 240 V, 50 Hz/60 Hz power supply), DC 5 V (using a commercially-
available USB AC adaptor capable of feeding in 3.0 A), or using
built-in lithium-ion battery
Usage life of lithium-ion battery (using the BLUETOOTH connection)
Approx. 16 hours* 6 * 7
Approx. 12 hours (factory default settings)*
If the volume level of the unit is set to maximum, the usage life will
be approx. 3 hours* 7 .
Usage life of lithium-ion battery (using the Wi-Fi connection)
Approx. 16 hours* 6 * 7
Approx. 12 hours (factory default settings)*
If the volume level of the unit is set to maximum, the usage life will
be approx. 3 hours* 7 .
Charging time of lithium-ion battery (while the unit is powered off)
Approx. 5 hours* 9
* 6 Measured value acquired by playing our specified music source with the volume level
of the unit set to 58 %, the sound mode set to STANDARD, and the illumination turned
off.
7
* Actual performance time may vary from the listed time due to the volume, songs
played, surrounding temperature, and usage conditions.
* 8 Measured value acquired by playing our specified music source with the volume level
of the unit set to 58 % and with the factory default settings (illumination: ON and
sound mode: EXTRA BASS).
* 9 Time that is required to charge the empty built-in battery to its full capacity when the
unit turns off.
Dimensions (including projecting parts and controls)
Mass
Supplied accessories
System requirements for charging battery using USB
Commercially-available USB AC adaptor
USB AC adaptor capable of feeding in 3.0 A
Commercially-available USB cables
USB Type-C™ cable compliant with USB standards
Compatible iPhone/iPod models
iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s,
iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5,
iPod touch (6th generation)
Note
Sony cannot accept responsibility in the event that data recorded to iPhone/iPod
is lost or damaged when using your iPhone/iPod connected to this unit.
Design and specifications are subject to change without notice.
7 * 8
7 * 8
Approx. 232 mm x 228 mm x 210 mm (w/h/d)
Approx. 3.1 kg
AC adaptor (AC-M1215WW) (1)
AC power cord (1)