Charging The Batteries; Powering On/Off - YUNEEC Typhoon Wizard User Manual

CHARGING THE BATTERIES
You can charge the LiPo battery in the TYPHOON Wizard™
by using supplied USB cable and inserting it into the USB
port on your computer. Make sure the TYPHOON Wizard™
is OFF and connect cable into open USB port on your
computer. The Power LED wil l show solid RED while battery
is charging, when charging is completed the red LED light
will turn off. It will take approximately 2 hours to charge a
fully discharged battery. A fully charged battery will give an
operating time of 3 .5 hours per charge.
WARNING:
Do not take out the LiPo battery installed in the
TYPHOON Wizard™, otherwise the TYPHOON Wizard™
may be damaged .
POWERING ON/OFF:
Press and hold the Power Button
0 .
When all LEOs blink
once and the TYPHOON Wizard™ vibrates once, release the
Power button
0 .
The Power LED glows solid green, and the
Aircraft Mode LED is on, then the TYPHOON Wizard™ is
powered on successfully.
NOTICE:
Gyroscopes Mal-function: If the TYPHOON Wizard™
keeps vibrating when powering on and fails to power on,
please return it to the service center for maintenance.