Advertisement
4. OPERATION
4.1.
Pull the hose outward. An intermittent clicking noise will be noticed as the hose extends.
If you stop pulling the hose whilst the clicking noise can be heard it will remain locked at that length.
4.2.
to extend the hose further, pull and again stop whilst the clicking noise can be heard to lock the hose.
4.3.
to unlock the hose and allow it to automatically rewind, extend the hose a little further and release during a quiet stage between the
periods of clicking. DO NOT allow the reel to rewind in an uncontrolled manner, always feed the hose to the reel.
4.4.
If it is necessary to alter the reel tension proceed as follows.
WARNING! Ensure that the air supply is disconnected.
4.4.1. Pull approximately 2mtr of hose from the drum and allow the drum to lock.
4.4.2. remove the hose bumper blocks (55/28) and draw the 2mtr of hose back through the hose guide.
4.4.3. Wrap the hose one turn around the drum to increase the tension or unwrap one turn to decrease the tension.
4.4.4. feed the end of the hose back through the hose guide and refit the bumper blocks.
4.4.5. check the tension and adjust further, as above, if necessary.
5. MAINTENANCE & STORAGE
WARNING! Before attempting maintenance or inspection, vent any pressure remaining in the hose.
to ensure reliable operation, clean the hose and casing regularly. DO NOT spray or wet the product, but clean with a damp cloth. DO NOT use
solvents or detergents, as these may cause permanent damage.
the hose reel does not require special maintenance as it is lubricated for life. If the product needs attention, consult your nearest
authorised service agent.
WARNING! DO NOT attempt to loosen, or remove, any casing nuts or bolts yourself, other than to reposition the hose guide (see
3.1.3.).
replacement of the supply hose should be carried out by skilled personnel only, consult your nearest authorised service agent.
should you wish to store the air hose reel, ensure that it is clean and dry. Place in a dark, safe, dry, childproof location, where the temperature
will remain reasonably stable. DO NOT store in a nylon, or plastic, bag as this will encourage condensation.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park,
Bury st. Edmunds, suffolk
IP32 7Ar
Original Language Version
01284 757500
Web
01284 703534
sales@sealey.co.uk
sA84, sA841, sA85.V2
www.sealey.co.uk
Issue no: 2 - 19/12/11
Advertisement
