Fluke PM 6666 Operator's Manual page 20

Page: 20
CONTROL OPERATING THE
CONTROL
The READ LEVEL push-
button. When the
indicator is on, the
display shows the
READ
trigger levels on the
LEVEL
display.
COM The COMMON B via A
B via A
push-button. When the
indicator is on the signal
on Input-A is also
connected to Input-B.
C Connect the signal to
OPTION
70MHz - 1.3GHz
INPUT-C via a BNC-
cable.
Ω
50
MAX 12Vrms
EXT REF INPUT
Connect an external
10 MHz frequency
source to the BNC-
connector on the rear
10MHz 0.5-15Vrms
panel of the
Timer/Counter marked
EXT REF INPUT.
PM 6666 - OPERATORS MANUAL
OPERATING INSTRUCTIONS
DISPLAY
LEVEL A
MEASURING TIME
SINGLE 0.2s 1s 10s
FREQ FREQ PERIOD RATIO
A C A A/B
MEASURING TIME
SINGLE 0.2s 1s 10s
FREQ FREQ PERIOD RATIO
A C A A/B
MEASURING TIME
SINGLE 0.2s 1s 10s
FREQ FREQ PERIOD RATIO
A C A A/B
LEVEL B
DISPLAY COMMON EXT AUTO READ
B via A REF LEVEL LEVEL
HOLD
TIME TOT A TOT A TOT A VOLT A
A-B B B MAN MAX-MIN
FUNCTION
DISPLAY COMMON EXT AUTO READ
B via A REF LEVEL LEVEL
HOLD
TIME TOT A TOT A TOT A VOLT A
A-B B B MAN MAX-MIN
FUNCTION
DISPLAY COMMON EXT AUTO READ
HOLD B via A REF LEVEL LEVEL
TIME TOT A TOT A TOT A VOLT A
A-B B B MAN MAX-MIN
FUNCTION
GPIB-CODE
Use INPA? and
INPB? to read
input settings to
the controler
COM ON
COM OFF
Not bus
controllable.